- Home/
- Comparison/
- Grader/
- Caterpillar 160M vs. John Deere JD670
Caterpillar 160M vs. John Deere JD670
21 reasons to buy Caterpillar 160M:
Sizes
Front part clearance | 600 mm and 559 mm | 7 % more or 41 mm |
Operation
Front axle standard operating weight | 4389 kg and 3471 kg | 21 % more or 918 kg |
Front axle maximum operating weight | 8382 kg and 3615 kg | 57 % more or 4767 kg |
Rear axle standard operating weight | 11514 kg and 8245 kg | 28 % more or 3269 kg |
Rear axle maximum operating weight | 15565 kg and 9741 kg | 37 % more or 5824 kg |
Fuel Capacity | 398 l. and 227 l. | 43 % more or 171 l. |
Cooling system fluid volume | 40 l. and 26.5 l. | 34 % more or 13.5 l. |
Circular gearbox fluid volume | 7 l. and 2.8 l. | 60 % more or 4.2 l. |
Each tandem case fluid volume | 80 l. and 15.1 l. | 81 % more or 64.9 l. |
Motor
Displacement | 8.8 l. and 6.8 l. | 23 % more or 2.0 l. |
Torque measured at | 2000 rev / min and 1300 rev / min | 35 % more or 700 rev |
Effective speeds output 7-8 | 158.8 kW and 93.2 kW | 41 % more or 65.6 kW |
Maximum power | 158.8 kW and 93.2 kW | 41 % more or 65.6 kW |
Effective drives torque 7-8 | 1237 Nm and 504.4 Nm | 59 % more or 732.6 Nm |
Gear box
Maximum forward speed | 47.4 km/h and 38.4 km/h | 19 % more or 9.0 km/h |
Maximum reverse gear | 37.4 km/h and 12.3 km/h | 67 % more or 25.1 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Front Axle
Clearance | 600 mm and 559 mm | 7 % more or 41 mm |
Circle
Maximum lifting above ground level | 452 mm and 409 mm | 10 % more or 43 mm |
Blade tilt front angle | 40 degrees and 35 degrees | 12 % more or 5 degrees |
Maximum radius outside left tyres | 2090 mm and 2130 mm | 2 % less or 40 mm |
5 reasons to buy John Deere JD670:
Steerage
Turn radius | 6.7 m and 7.6 m | 12 % less or 0.9 m |
Operation
Hydraulic system fluid volume | 106 l. and 64 l. | 40 % more or 42 l. |
Motor
Power measured at | 2300 rev / min and 2000 rev / min | 13 % more or 300 rev |
Hydraulic system
Pump flow rate | 132 l/min and 210 l/min | 37 % less or 78 l/min |
Circle
Right maximum radius outside tyres | 2130 mm and 2278 mm | 6 % less or 148 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 25 degrees |
Sizes
Wheelbase | 6121 mm and 5970 mm |
Blade base | 2609 mm and 2540 mm |
Dual axis wheelbase | 1523 mm and 1540 mm |
Height to cab upper part | 3293 mm and 3200 mm |
Dimensional length | 8713 mm and 8310 mm |
Between tyres width | 2493 mm and 2340 mm |
Operation
Overall standard operating weight | 15903 kg and 11716 kg |
Total maximum operating weight | 23947 kg and 13356 kg |
Motor
Manufacturer | Caterpillar and John Deere |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump and Variable displacement with locking in the middle position |
Overflow valve pressure | 24150 kPa and 15513.2 kPa |
Gear box
Transmission type | direct drive, powershift, camshaft and powershift |
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 32 degrees and 30 degrees |
Dump
Mouldboard width | 4300 mm and 3.7 mm |
Mouldboard height | 686 mm and 610 mm |
Mouldboard thickness | 25 mm and 22 mm |
Left lateral displacement | 820 mm and 683 mm |
Lateral right shift | 950 mm and 683 mm |
Circle
Diameter | 1553 mm and 1470 mm |
Images
Sizes
1. Dimensional length | 8713 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2493 mm | 2. Between tyres width | 2340 mm |
3. Height to cab upper part | 3293 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 6121 mm | 4. Wheelbase | 5970 mm |
6. Front part clearance | 600 mm | 6. Front part clearance | 559 mm |
7. Dual axis wheelbase | 1523 mm | 7. Dual axis wheelbase | 1540 mm |
8. Blade base | 2609 mm | 8. Blade base | 2540 mm |