- Home/
- Comparison/
- Grader/
- Caterpillar 16H ES vs. Dressta RD200C
Caterpillar 16H ES vs. Dressta RD200C
7 reasons to buy Caterpillar 16H ES:
Steerage
Turn radius | 8.2 m and 7500 m | 100 % less or 7491.8 m |
Operation
Fuel Capacity | 492 l. and 380 l. | 23 % more or 112 l. |
Motor
Maximum power | 205.1 kW and 132.7 kW | 35 % more or 72.4 kW |
Displacement | 14.6 l. and 6.7 l. | 54 % more or 7.9 l. |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 8 and 3 | 62 % more or 5 |
Maximum reverse gear | 42.3 km/h and 31.4 km/h | 26 % more or 10.9 km/h |
4 reasons to buy Dressta RD200C:
Operation
Generator current strength | 75 amperes and 50 amperes | 33 % more or 25 amperes |
Hydraulic system
Pump flow rate | 80 l/min and 243 l/min | 67 % less or 163 l/min |
Gear box
Maximum forward speed | 44.7 km/h and 44.5 km/h | 0 % more or 0.2 km/h |
Circle
Maximum lifting above ground level | 500 mm and 419 mm | 16 % more or 81 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 25 degrees |
Sizes
Height to cab upper part | 3520 mm and 3300 mm |
Dimensional length | 9990 mm and 9540 mm |
Between tyres width | 3080 mm and 2500 mm |
Wheelbase | 6960 mm and 7300 mm |
Blade base | 3070 mm and 3050 mm |
Operation
Overall standard operating weight | 24748 kg and 36376 kg |
Hydraulic system fluid volume | 130 l. and 130 l. |
Tyre size | 15-25 12PR (E-2) and 14.00 - 24 G-2 16PR |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Caterpillar and Cummins |
Model | 3406 DITA and QSB 6.7 |
Hydraulic system
Type of pump | Axial-piston pump and axial piston pump |
Overflow valve pressure | 24131.6 kPa and 14000 kPa |
Front Axle
Wheel tilt | 18 degrees and 22 degrees |
General fluctuations | 32 degrees and 40 degrees |
Dump
Mouldboard thickness | 25 mm and 22 mm |
Mouldboard width | 4880 mm and 3660 mm |
Mouldboard height | 787 mm and 670 mm |
Images
Sizes
1. Dimensional length | 9990 mm | 1. Dimensional length | 9540 mm |
2. Between tyres width | 3080 mm | 2. Between tyres width | 2500 mm |
3. Height to cab upper part | 3520 mm | 3. Height to cab upper part | 3300 mm |
4. Wheelbase | 6960 mm | 4. Wheelbase | 7300 mm |
8. Blade base | 3070 mm | 8. Blade base | 3050 mm |