- Home/
- Comparison/
- Grader/
- Caterpillar 16H ES vs. Volvo G740 VHP
Caterpillar 16H ES vs. Volvo G740 VHP
8 reasons to buy Caterpillar 16H ES:
Operation
Hydraulic system fluid volume | 130 l. and 90 l. | 31 % more or 40 l. |
Fuel Capacity | 492 l. and 378.5 l. | 23 % more or 113.5 l. |
Motor
Effective speeds output 7-8 | 205.1 kW and 175.2 kW | 15 % more or 29.9 kW |
Maximum power | 205.1 kW and 175.2 kW | 15 % more or 29.9 kW |
Displacement | 14.6 l. and 10.8 l. | 26 % more or 3.8 l. |
Gear box
Reverse gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 44.5 km/h and 43.8 km/h | 2 % more or 0.7 km/h |
Maximum reverse gear | 42.3 km/h and 31.4 km/h | 26 % more or 10.9 km/h |
3 reasons to buy Volvo G740 VHP:
Operation
Generator current strength | 75 amperes and 50 amperes | 33 % more or 25 amperes |
Hydraulic system
Pump flow rate | 183 l/min and 243 l/min | 25 % less or 60 l/min |
Circle
Maximum lifting above ground level | 436.9 mm and 419 mm | 4 % more or 17.9 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 22 degrees |
Sizes
Height to cab upper part | 3520 mm and 3099 mm |
Dimensional length | 9990 mm and 8636 mm |
Between tyres width | 3080 mm and 2540 mm |
Wheelbase | 6960 mm and 6248 mm |
Blade base | 3070 mm and 2718 mm |
Operation
Tyre size | 15-25 12PR (E-2) and 14.00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 24748 kg and 16153 kg |
Motor
Manufacturer | Caterpillar and Cummins |
Model | 3406 DITA and M11 |
Hydraulic system
Type of pump | Axial-piston pump and hydraulic system with load sensing |
Overflow valve pressure | 24131.6 kPa and 17236.9 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 32 degrees and 16 degrees |
Dump
Mouldboard width | 4880 mm and 4572 mm |
Mouldboard height | 787 mm and 736.6 mm |
Mouldboard thickness | 25 mm and 25.4 mm |
Images
Sizes
1. Dimensional length | 9990 mm | 1. Dimensional length | 8636 mm |
2. Between tyres width | 3080 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3520 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6960 mm | 4. Wheelbase | 6248 mm |
8. Blade base | 3070 mm | 8. Blade base | 2718 mm |