vs.

      Caterpillar 24M vs. New Holland F156.6

      18 reasons to buy Caterpillar 24M:

      Steerage

      Turn radius 12.4 m and 8250 m 100 % less or 8237.6 m

      Sizes

      Rear ground clearance 507 mm and 328 mm 35 % more or 179 mm
      Front part clearance 858 mm and 141 mm 84 % more or 717 mm

      Operation

      Rear axle standard operating weight 43695 kg and 9841 kg 77 % more or 33854 kg
      Fuel Capacity 1326 l. and 275 l. 79 % more or 1051 l.
      Front axle maximum operating weight 19927 kg and 5200 kg 74 % more or 14727 kg
      Hydraulic system fluid volume 264 l. and 185 l. 30 % more or 79 l.
      Rear axle maximum operating weight 46211 kg and 11500 kg 75 % more or 34711 kg
      Each tandem case fluid volume 322 l. and 68 l. 79 % more or 254 l.
      Front axle standard operating weight 18761 kg and 4496 kg 76 % more or 14265 kg

      Motor

      Effective speeds output 5-6 397.5 kW and 130.5 kW 67 % more or 267.0 kW
      Maximum power 397.5 kW and 130.5 kW 67 % more or 267.0 kW
      Displacement 18.1 l. and 5.9 l. 67 % more or 12.2 l.

      Gear box

      Maximum reverse gear 41.2 km/h and 27.1 km/h 34 % more or 14.1 km/h
      Maximum forward speed 43 km/h and 37.4 km/h 13 % more or 5.6 km/h

      Front Axle

      Clearance 858 mm and 646 mm 25 % more or 212 mm

      Dump

      Maximum cutting depth 657 mm and 500 mm 24 % more or 157 mm

      Circle

      Maximum lifting above ground level 634 mm and 480 mm 24 % more or 154 mm

      4 reasons to buy New Holland F156.6:

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 126 l/min and 550 l/min 77 % less or 424 l/min

      Circle

      Maximum radius outside left tyres 2520 mm and 3222 mm 22 % less or 702 mm
      Right maximum radius outside tyres 3210 mm and 3228 mm 1 % less or 18 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Blade base 4048 mm and 2504 mm
      Dual axis wheelbase 2285 mm and 1544 mm
      Height to cab upper part 4352 mm and 3373 mm
      Dimensional length 14194 mm and 9975 mm
      Between tyres width 4280 mm and 2595 mm
      Wheelbase 10278 mm and 5983 mm

      Operation

      Total maximum operating weight 66138 kg and 16200 kg
      Overall standard operating weight 62456 kg and 14336 kg
      Tyre size 29.5-29 28PR and 17.5R25EM

      Motor

      Model C18 ACERT and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Axial cam pump, variable displacement piston pump
      Overflow valve pressure 24150 kPa and 20000 kPa

      Gear box

      Transmission type automatic, electronically controlled gear shifting under load and powershift transmission
      Forward gears number 6 and 6
      Reverse gears number 3 and 3

      Front Axle

      Wheel tilt 18 degrees and 21 degrees
      General fluctuations 32 degrees and 15 degrees

      Dump

      Lateral right shift 1244 mm and 755 mm
      Mouldboard width 7315 mm and 3660 mm
      Mouldboard height 1067 mm and 152 mm
      Mouldboard thickness 50 mm and 19 mm
      Left lateral displacement 870 mm and 645 mm

      Circle

      Left shift 804 mm and 645 mm
      Right shift 437 mm and 755 mm

      Images

      Sizes

      1. Dimensional length 14194 mm 1. Dimensional length 9975 mm
      2. Between tyres width 4280 mm 2. Between tyres width 2595 mm
      3. Height to cab upper part 4352 mm 3. Height to cab upper part 3373 mm
      4. Wheelbase 10278 mm 4. Wheelbase 5983 mm
      5. Rear ground clearance 507 mm 5. Rear ground clearance 328 mm
      6. Front part clearance 858 mm 6. Front part clearance 141 mm
      7. Dual axis wheelbase 2285 mm 7. Dual axis wheelbase 1544 mm
      8. Blade base 4048 mm 8. Blade base 2504 mm