vs.

      Caterpillar NO.14E vs. Case 865B VHP

      5 reasons to buy Caterpillar NO.14E:

      Operation

      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.

      Motor

      Displacement 10.5 l. and 6.7 l. 36 % more or 3.8 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 47.3 km/h and 28.5 km/h 40 % more or 18.8 km/h

      Circle

      Maximum lifting above ground level 460 mm and 444.5 mm 3 % more or 15.5 mm

      11 reasons to buy Case 865B VHP:

      Steerage

      Turn radius 7.3 m and 11.6 m 37 % less or 4.3 m

      Operation

      Hydraulic system fluid volume 190 l. and 32 l. 83 % more or 158 l.
      Transmission fluid volume 94.6 l. and 76 l. 20 % more or 18.6 l.
      Rear differential/final drive fluid volume 43.9 l. and 35 l. 20 % more or 8.9 l.
      Front axle standard operating weight 5501.6 kg and 4600 kg 16 % more or 901.6 kg
      Rear axle standard operating weight 10824.5 kg and 9700 kg 10 % more or 1124.5 kg
      Each tandem case fluid volume 60.2 l. and 47 l. 22 % more or 13.2 l.
      Fuel Capacity 340.7 l. and 285 l. 16 % more or 55.7 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42.8 km/h and 39.1 km/h 9 % more or 3.7 km/h

      Neutral reasons:

      Sizes

      Height to cab upper part 3250 mm and 3340 mm
      Dimensional length 8300 mm and 8534 mm
      Between tyres width 2440 mm and 2452 mm
      Wheelbase 6100 mm and 6219 mm
      Blade base 2750 mm and 2562 mm
      Dual axis wheelbase 1520 mm and 1594 mm

      Operation

      Overall standard operating weight 14300 kg and 16326.2 kg
      Tyre size 14-24 10PR and 17.5-25
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Case

      Hydraulic system

      Type of pump Hermetic and piston type with load sensing

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 31 degrees and 15.3 degrees

      Circle

      Rotating 180 degrees and 360 degrees
      Diameter 1650 mm and 1752.6 mm

      Images

      Sizes

      1. Dimensional length 8300 mm 1. Dimensional length 8534 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2452 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6100 mm 4. Wheelbase 6219 mm
      7. Dual axis wheelbase 1520 mm 7. Dual axis wheelbase 1594 mm
      8. Blade base 2750 mm 8. Blade base 2562 mm