vs.

      Caterpillar NO.14E vs. Caterpillar 16H

      5 reasons to buy Caterpillar NO.14E:

      Operation

      Cooling system fluid volume 47 l. and 46.5 l. 1 % more or 0.5 l.

      Gear box

      Maximum reverse gear 47.3 km/h and 45.7 km/h 3 % more or 1.6 km/h

      Circle

      Maximum lifting above ground level 460 mm and 419 mm 9 % more or 41 mm
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      16 reasons to buy Caterpillar 16H:

      Steerage

      Turn radius 8.2 m and 11.6 m 29 % less or 3.4 m

      Operation

      Rear differential/final drive fluid volume 114 l. and 35 l. 69 % more or 79 l.
      Each tandem case fluid volume 121 l. and 47 l. 61 % more or 74 l.
      Front axle standard operating weight 6982 kg and 4600 kg 34 % more or 2382 kg
      Rear axle standard operating weight 17758 kg and 9700 kg 45 % more or 8058 kg
      Fuel Capacity 492 l. and 285 l. 42 % more or 207 l.
      Hydraulic system fluid volume 129 l. and 32 l. 75 % more or 97 l.

      Motor

      Effective speeds output 5-6 212.5 kW and 111.9 kW 47 % more or 100.6 kW
      Maximum power 212.5 kW and 111.9 kW 47 % more or 100.6 kW
      Displacement 11.9 l. and 10.5 l. 12 % more or 1.4 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 8 and 6 25 % more or 2
      Maximum forward speed 48.1 km/h and 39.1 km/h 19 % more or 9.0 km/h

      Front Axle

      Clearance 732 mm and 580 mm 21 % more or 152 mm

      Circle

      Maximum radius outside left tyres 2311 mm and 2440 mm 5 % less or 129 mm
      Right maximum radius outside tyres 2311 mm and 2440 mm 5 % less or 129 mm

      Neutral reasons:

      Sizes

      Blade base 2750 mm and 3071 mm
      Height to cab upper part 3250 mm and 3524 mm
      Dual axis wheelbase 1520 mm and 1841 mm
      Dimensional length 8300 mm and 9994 mm
      Between tyres width 2440 mm and 3077 mm
      Wheelbase 6100 mm and 6960 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14300 kg and 24740 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Caterpillar
      Power measured at 2000 rev / min and 2000 rev / min

      Hydraulic system

      Type of pump Hermetic and axial piston

      Gear box

      Transmission type powershift transmission and direct drive, powershift, of planetary type

      Front Axle

      Wheel tilt 22 degrees and 18 degrees
      General fluctuations 31 degrees and 32 degrees

      Circle

      Diameter 1650 mm and 1822 mm
      Left shift 1040 mm and 690 mm
      Right shift 940 mm and 560 mm

      Images

      Sizes

      1. Dimensional length 8300 mm 1. Dimensional length 9994 mm
      2. Between tyres width 2440 mm 2. Between tyres width 3077 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3524 mm
      4. Wheelbase 6100 mm 4. Wheelbase 6960 mm
      7. Dual axis wheelbase 1520 mm 7. Dual axis wheelbase 1841 mm
      8. Blade base 2750 mm 8. Blade base 3071 mm