vs.

      Caterpillar NO.14E vs. Mitsubishi MG230-E

      11 reasons to buy Caterpillar NO.14E:

      Operation

      Fuel Capacity 285 l. and 210 l. 26 % more or 75 l.
      Transmission fluid volume 76 l. and 23 l. 70 % more or 53 l.
      Each tandem case fluid volume 47 l. and 28 l. 40 % more or 19 l.

      Motor

      Displacement 10.5 l. and 5.9 l. 44 % more or 4.6 l.
      Maximum power 111.9 kW and 85.8 kW 23 % more or 26.1 kW

      Gear box

      Maximum reverse gear 47.3 km/h and 33.2 km/h 30 % more or 14.1 km/h
      Maximum forward speed 39.1 km/h and 32.6 km/h 17 % more or 6.5 km/h

      Front Axle

      Clearance 580 mm and 480 mm 17 % more or 100 mm

      Circle

      Maximum lifting above ground level 460 mm and 430 mm 7 % more or 30 mm
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees
      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees

      2 reasons to buy Mitsubishi MG230-E:

      Operation

      Hydraulic system fluid volume 110 l. and 32 l. 71 % more or 78 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Neutral reasons:

      Sizes

      Dimensional length 8300 mm and 7325 mm
      Between tyres width 2440 mm and 2140 mm
      Wheelbase 6100 mm and 5300 mm
      Blade base 2750 mm and 2185 mm
      Height to cab upper part 3250 mm and 3030 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 14300 kg and 11060 kg
      Tyre size 14-24 10PR and 13.00-24-12

      Motor

      Manufacturer Caterpillar and Mitsubishi
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Hermetic and Pump with double gear

      Gear box

      Transmission type powershift transmission and planetary gear
      Forward gears number 6 and 6
      Reverse gears number 6 and 6

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 31 degrees and 30 degrees

      Circle

      Rotating 180 degrees and 360 degrees
      Left shift 1040 mm and 1650 mm
      Right shift 940 mm and 1680 mm

      Images

      Sizes

      8. Blade base 2750 mm 8. Blade base 2185 mm
      1. Dimensional length 8300 mm 1. Dimensional length 7325 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2140 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3030 mm
      4. Wheelbase 6100 mm 4. Wheelbase 5300 mm