vs.

      Caterpillar NO.14E vs. Mitsubishi MG330-E

      8 reasons to buy Caterpillar NO.14E:

      Operation

      Fuel Capacity 285 l. and 230 l. 19 % more or 55 l.
      Transmission fluid volume 76 l. and 23 l. 70 % more or 53 l.

      Motor

      Maximum power 111.9 kW and 100.7 kW 10 % more or 11.2 kW
      Displacement 10.5 l. and 7.5 l. 29 % more or 3.0 l.

      Gear box

      Maximum reverse gear 47.3 km/h and 43.3 km/h 8 % more or 4.0 km/h

      Front Axle

      Clearance 580 mm and 555 mm 4 % more or 25 mm

      Circle

      Blade tilt rear angle 90 degrees and 5 degrees 94 % more or 85 degrees
      Blade tilt front angle 90 degrees and 40 degrees 56 % more or 50 degrees

      5 reasons to buy Mitsubishi MG330-E:

      Operation

      Hydraulic system fluid volume 67 l. and 32 l. 52 % more or 35 l.
      Each tandem case fluid volume 73 l. and 47 l. 36 % more or 26 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Gear box

      Maximum forward speed 42.6 km/h and 39.1 km/h 8 % more or 3.5 km/h

      Circle

      Maximum lifting above ground level 480 mm and 460 mm 4 % more or 20 mm

      Neutral reasons:

      Sizes

      Dimensional length 8300 mm and 7820 mm
      Height to cab upper part 3250 mm and 3130 mm
      Between tyres width 2440 mm and 2450 mm
      Wheelbase 6100 mm and 5700 mm
      Blade base 2750 mm and 2500 mm

      Operation

      Overall standard operating weight 14300 kg and 15600 kg
      Tyre size 14-24 10PR and 14.00-24-12
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Manufacturer Caterpillar and Mitsubishi

      Hydraulic system

      Type of pump Hermetic and Pump with double gear

      Gear box

      Reverse gears number 6 and 6
      Transmission type powershift transmission and planetary gear
      Forward gears number 6 and 6

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 31 degrees and 30 degrees

      Circle

      Rotating 180 degrees and 360 degrees
      Left shift 1040 mm and 1890 mm
      Right shift 940 mm and 1900 mm

      Images

      Sizes

      1. Dimensional length 8300 mm 1. Dimensional length 7820 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2450 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3130 mm
      4. Wheelbase 6100 mm 4. Wheelbase 5700 mm
      8. Blade base 2750 mm 8. Blade base 2500 mm