vs.

      John Deere 772B vs. Volvo G740B

      4 reasons to buy John Deere 772B:

      Motor

      Torque measured at 1400 rev / min and 1100 rev / min 21 % more or 300 rev

      Hydraulic system

      Pump flow rate 198.4 l/min and 284 l/min 30 % less or 85.6 l/min

      Circle

      Maximum lifting above ground level 470 mm and 436.9 mm 7 % more or 33.1 mm
      Blade tilt front angle 49 degrees and 44 degrees 10 % more or 5 degrees

      17 reasons to buy Volvo G740B:

      Operation

      Cooling system fluid volume 50 l. and 26.5 l. 47 % more or 23.5 l.
      Front axle standard operating weight 5052 kg and 4263.8 kg 16 % more or 788.2 kg
      Hydraulic system fluid volume 134 l. and 87.1 l. 35 % more or 46.9 l.
      Rear axle standard operating weight 11788 kg and 10455.3 kg 11 % more or 1332.7 kg
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Fuel Capacity 454 l. and 340.7 l. 25 % more or 113.3 l.
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes

      Motor

      Effective speeds output 7-8 181.2 kW and 115.6 kW 36 % more or 65.6 kW
      Maximum power 181.2 kW and 115.6 kW 36 % more or 65.6 kW
      Effective drives torque 7-8 1147 Nm and 650.8 Nm 43 % more or 496.2 Nm
      Displacement 9.6 l. and 7.6 l. 21 % more or 2.0 l.

      Gear box

      Maximum forward speed 43.8 km/h and 40.6 km/h 7 % more or 3.2 km/h
      Maximum reverse gear 31.4 km/h and 13.8 km/h 56 % more or 17.6 km/h

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2160 mm 7 % less or 140.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2110 mm 5 % less or 103.4 mm
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3090 mm and 3099 mm
      Dimensional length 8510 mm and 9220 mm
      Between tyres width 2440 mm and 2540 mm
      Wheelbase 5970 mm and 6248 mm
      Blade base 2670 mm and 2718 mm

      Operation

      Overall standard operating weight 14719.1 kg and 16840 kg
      Tyre size 14.00-24 and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6
      Manufacturer John Deere and Volvo
      Model 6466T and D10BGAE2

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and hydraulic system with load sensing

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 32 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 736.6 mm
      Mouldboard thickness 22.4 mm and 25.4 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Rotating 360 degrees and 360 degrees
      Left shift 787 mm and 774.7 mm
      Right shift 724 mm and 749.3 mm
      Diameter 1520 mm and 1683 mm

      Images

      Sizes

      1. Dimensional length 8510 mm 1. Dimensional length 9220 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3090 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6248 mm
      8. Blade base 2670 mm 8. Blade base 2718 mm