vs.

      John Deere JD770 vs. Volvo G730B

      3 reasons to buy John Deere JD770:

      Operation

      Cooling system fluid volume 37.9 l. and 28 l. 26 % more or 9.9 l.

      Motor

      Displacement 8.7 l. and 7.1 l. 18 % more or 1.6 l.

      Hydraulic system

      Pump flow rate 215.8 l/min and 284 l/min 24 % less or 68.2 l/min

      14 reasons to buy Volvo G730B:

      Operation

      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.
      Front axle standard operating weight 4670 kg and 3728.5 kg 20 % more or 941.5 kg
      Hydraulic system fluid volume 134 l. and 117.3 l. 12 % more or 16.7 l.
      Rear axle standard operating weight 11433 kg and 9808.9 kg 14 % more or 1624.1 kg
      Each tandem case fluid volume 100 l. and 15.1 l. 85 % more or 84.9 l.

      Motor

      Effective drives torque 7-8 1049.4 Nm and 596.6 Nm 43 % more or 452.8 Nm
      Effective speeds output 7-8 170 kW and 105.9 kW 38 % more or 64.1 kW
      Maximum power 170 kW and 105.9 kW 38 % more or 64.1 kW

      Gear box

      Maximum forward speed 45.9 km/h and 40.4 km/h 12 % more or 5.5 km/h
      Maximum reverse gear 32.8 km/h and 13.8 km/h 58 % more or 19.0 km/h

      Front Axle

      Clearance 610 mm and 571 mm 6 % more or 39 mm

      Circle

      Right maximum radius outside tyres 2006.6 mm and 2350 mm 15 % less or 343.4 mm
      Maximum lifting above ground level 444.5 mm and 432 mm 3 % more or 12.5 mm
      Maximum radius outside left tyres 2019.3 mm and 2340 mm 14 % less or 320.7 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Height to cab upper part 3200 mm and 3099 mm
      Dimensional length 8470 mm and 9119 mm
      Between tyres width 2440 mm and 2540 mm
      Wheelbase 5970 mm and 6096 mm
      Blade base 2720 mm and 2591 mm

      Operation

      Overall standard operating weight 13537.5 kg and 16103 kg
      Tyre size 14.00-24 and 14.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer John Deere and Volvo
      Power measured at 2200 rev / min and 2200 rev / min
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement with locking in the middle position and hydraulic system with load sensing
      Overflow valve pressure 15513.2 kPa and 18615.8 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 18 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 635 mm
      Mouldboard thickness 22.4 mm and 22.2 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Diameter 1500 mm and 1683 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8470 mm 1. Dimensional length 9119 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6096 mm
      8. Blade base 2720 mm 8. Blade base 2591 mm