vs.

      Komatsu GD675-3 vs. John Deere JD570A

      15 reasons to buy Komatsu GD675-3:

      Operation

      Cooling system fluid volume 39.5 l. and 21.2 l. 46 % more or 18.3 l.
      Circular gearbox fluid volume 5 l. and 1.4 l. 72 % more or 3.6 l.
      Each tandem case fluid volume 83 l. and 18.9 l. 77 % more or 64.1 l.
      Front axle standard operating weight 4300 kg and 2608 kg 39 % more or 1692 kg
      Rear axle standard operating weight 11510 kg and 6495 kg 44 % more or 5015 kg
      Fuel Capacity 340 l. and 189.3 l. 44 % more or 150.7 l.

      Motor

      Maximum power 149 kW and 68.6 kW 54 % more or 80.4 kW
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective speeds output 7-8 149 kW and 63.4 kW 57 % more or 85.6 kW
      Effective drives torque 7-8 975 Nm and 322.7 Nm 67 % more or 652.3 Nm
      Displacement 8.3 l. and 5.4 l. 35 % more or 2.9 l.

      Gear box

      Maximum forward speed 42.2 km/h and 34.8 km/h 18 % more or 7.4 km/h
      Maximum reverse gear 38.3 km/h and 11.4 km/h 70 % more or 26.9 km/h

      Front Axle

      Clearance 630 mm and 597 mm 5 % more or 33 mm

      Circle

      Maximum lifting above ground level 505 mm and 330 mm 35 % more or 175 mm

      4 reasons to buy John Deere JD570A:

      Steerage

      Turn radius 5.5 m and 6.9 m 20 % less or 1.4 m

      Operation

      Hydraulic system fluid volume 79.5 l. and 45 l. 43 % more or 34.5 l.

      Motor

      Power measured at 2300 rev / min and 1900 rev / min 17 % more or 400 rev

      Hydraulic system

      Pump flow rate 102 l/min and 194 l/min 47 % less or 92 l/min

      Neutral reasons:

      Steerage

      Left and right hinge connection 23 degrees and 22 degrees

      Sizes

      Dimensional length 9865 mm and 7430 mm
      Between tyres width 2550 mm and 2410 mm
      Wheelbase 6070 mm and 5280 mm
      Blade base 2600 mm and 2340 mm
      Dual axis wheelbase 1535 mm and 1440 mm
      Height to cab upper part 3120 mm and 3200 mm

      Operation

      Tyre size Low-pressure, without inner tube, 17.5R25 and 13.00-24
      Operating voltage 24 V and 12 V
      Overall standard operating weight 15810 kg and 9083 kg

      Motor

      Cylinders number 6 and 6
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging
      Manufacturer Komatsu and John Deere

      Hydraulic system

      Overflow valve pressure 20600 kPa and 13789.5 kPa

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 20 degrees
      General fluctuations 32 degrees and 30 degrees

      Dump

      Mouldboard width 3710 mm and 3.7 mm
      Mouldboard height 660 mm and 559 mm
      Mouldboard thickness 25 mm and 15.8 mm
      Left lateral displacement 820 mm and 794 mm
      Lateral right shift 820 mm and 679 mm

      Circle

      Diameter 1530 mm and 1370 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3120 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6070 mm 4. Wheelbase 5280 mm
      7. Dual axis wheelbase 1535 mm 7. Dual axis wheelbase 1440 mm
      8. Blade base 2600 mm 8. Blade base 2340 mm
      1. Dimensional length 9865 mm 1. Dimensional length 7430 mm
      2. Between tyres width 2550 mm 2. Between tyres width 2410 mm