vs.

      New Holland F140 vs. Caterpillar 143H

      8 reasons to buy New Holland F140:

      Steerage

      Turn radius 7.3 m and 7.5 m 3 % less or 0.2 m

      Sizes

      Rear ground clearance 610 mm and 344 mm 44 % more or 266 mm

      Operation

      Cooling system fluid volume 40 l. and 38 l. 5 % more or 2 l.
      Hydraulic system fluid volume 94.6 l. and 80 l. 15 % more or 14.6 l.

      Hydraulic system

      Pump flow rate 192 l/min and 206 l/min 7 % less or 14 l/min

      Front Axle

      Clearance 622 mm and 600 mm 4 % more or 22 mm

      Circle

      Maximum radius outside left tyres 1582 mm and 1896 mm 17 % less or 314 mm
      Right maximum radius outside tyres 1742 mm and 1978 mm 12 % less or 236 mm

      11 reasons to buy Caterpillar 143H:

      Operation

      Circular gearbox fluid volume 7 l. and 2.8 l. 60 % more or 4.2 l.
      Each tandem case fluid volume 64 l. and 30 l. 53 % more or 34 l.
      Front axle maximum operating weight 7906 kg and 3707 kg 53 % more or 4199 kg
      Rear axle maximum operating weight 14240 kg and 9828 kg 31 % more or 4412 kg
      Fuel Capacity 397 l. and 340 l. 14 % more or 57 l.

      Motor

      Displacement 10.3 l. and 5.9 l. 43 % more or 4.4 l.

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44 km/h and 43 km/h 2 % more or 1 km/h
      Maximum reverse gear 34.7 km/h and 28.5 km/h 18 % more or 6.2 km/h

      Dump

      Maximum cutting depth 715 mm and 712 mm 0 % more or 3 mm

      Circle

      Maximum lifting above ground level 480 mm and 444 mm 7 % more or 36 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 20 degrees

      Sizes

      Height to cab upper part 3340 mm and 3131 mm
      Dimensional length 8521 mm and 8713 mm
      Between tyres width 2510 mm and 2553 mm
      Wheelbase 6219 mm and 6169 mm
      Blade base 2562 mm and 2561 mm
      Dual axis wheelbase 1594 mm and 1523 mm

      Operation

      Total maximum operating weight 13535 kg and 22146 kg

      Motor

      Manufacturer Cummins and Caterpillar
      Model 6BTA5.9 1 level and 3176C DITA ATAAC VHP

      Hydraulic system

      Type of pump full hydraulic system with load sensing and axial piston
      Overflow valve pressure 17900 kPa and 24150 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 524 mm
      Lateral right shift 686 mm and 660 mm
      Mouldboard width 3658 mm and 3658 mm
      Mouldboard height 622 mm and 610 mm
      Lowered blade pressure 8636 kg and 13665 kg

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1530 mm
      Blade tilt front angle 40 degrees and 40 degrees

      Images

      Sizes

      5. Rear ground clearance 610 mm 5. Rear ground clearance 344 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1523 mm
      8. Blade base 2562 mm 8. Blade base 2561 mm
      1. Dimensional length 8521 mm 1. Dimensional length 8713 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2553 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3131 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6169 mm