vs.

      New Holland F140 vs. Dressta RD200C

      5 reasons to buy New Holland F140:

      Steerage

      Turn radius 7.3 m and 7500 m 100 % less or 7492.7 m

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Front Axle

      Clearance 622 mm and 550 mm 12 % more or 72 mm

      Dump

      Maximum cutting depth 712 mm and 350 mm 51 % more or 362 mm

      10 reasons to buy Dressta RD200C:

      Operation

      Hydraulic system fluid volume 130 l. and 94.6 l. 27 % more or 35.4 l.
      Transmission fluid volume 35 l. and 25 l. 29 % more or 10 l.
      Fuel Capacity 380 l. and 340 l. 11 % more or 40 l.
      Generator current strength 75 amperes and 70 amperes 7 % more or 5 amperes

      Motor

      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.
      Power measured at 2400 rev / min and 2200 rev / min 8 % more or 200 rev

      Hydraulic system

      Pump flow rate 80 l/min and 192 l/min 58 % less or 112 l/min

      Gear box

      Maximum forward speed 44.7 km/h and 43 km/h 4 % more or 1.7 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Circle

      Maximum lifting above ground level 500 mm and 444 mm 11 % more or 56 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3340 mm and 3300 mm
      Dimensional length 8521 mm and 9540 mm
      Between tyres width 2510 mm and 2500 mm
      Wheelbase 6219 mm and 7300 mm
      Blade base 2562 mm and 3050 mm
      Dual axis wheelbase 1594 mm and 1540 mm

      Operation

      Cooling system fluid volume 40 l. and 40 l.
      Each tandem case fluid volume 30 l. and 30 l.
      Tyre size 13.00 x 24 (12PR) and 14.00 - 24 G-2 16PR
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging and CAC
      Manufacturer Cummins and Cummins
      Model 6BTA5.9 1 level and QSB 6.7

      Hydraulic system

      Type of pump full hydraulic system with load sensing and axial piston pump
      Overflow valve pressure 17900 kPa and 14000 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      General fluctuations 19 degrees and 40 degrees
      Wheel tilt 18 degrees and 22 degrees

      Dump

      Mouldboard width 3658 mm and 3660 mm
      Mouldboard height 622 mm and 670 mm
      Mouldboard thickness 22 mm and 22 mm
      Left lateral displacement 533 mm and 800 mm
      Lateral right shift 686 mm and 800 mm

      Circle

      Diameter 1753 mm and 1350 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9540 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2500 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6219 mm 4. Wheelbase 7300 mm
      7. Dual axis wheelbase 1594 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 3050 mm