- Home/
- Comparison/
- Grader/
- New Holland F140 vs. Mauldin MG622
New Holland F140 vs. Mauldin MG622
9 reasons to buy New Holland F140:
Operation
Fuel Capacity | 340 l. and 151.4 l. | 55 % more or 188.6 l. |
Motor
Displacement | 5.9 l. and 4 l. | 32 % more or 1.9 l. |
Gear box
Maximum forward speed | 43 km/h and 35.4 km/h | 18 % more or 7.6 km/h |
Forward gears number | 8 and 2 | 75 % more or 6 |
Reverse gears number | 4 and 2 | 50 % more or 2 |
Dump
Maximum cutting depth | 712 mm and 596.9 mm | 16 % more or 115.1 mm |
Circle
Maximum radius outside left tyres | 1582 mm and 1962.2 mm | 19 % less or 380.2 mm |
Right maximum radius outside tyres | 1742 mm and 1816.1 mm | 4 % less or 74.1 mm |
Maximum lifting above ground level | 444 mm and 358.1 mm | 19 % more or 85.9 mm |
2 reasons to buy Mauldin MG622:
Steerage
Turn radius | 6.2 m and 7.3 m | 15 % less or 1.1 m |
Gear box
Maximum reverse gear | 35.4 km/h and 28.5 km/h | 19 % more or 6.9 km/h |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 24 degrees |
Sizes
Dimensional length | 8521 mm and 8345.4 mm |
Between tyres width | 2510 mm and 2532.9 mm |
Wheelbase | 6219 mm and 5282.2 mm |
Blade base | 2562 mm and 2362.2 mm |
Dual axis wheelbase | 1594 mm and 1447.8 mm |
Height to cab upper part | 3340 mm and 2947.4 mm |
Operation
Hydraulic system fluid volume | 94.6 l. and 94.6 l. |
Tyre size | 13.00 x 24 (12PR) and 15.5-25 |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Cummins and Deutz |
Model | 6BTA5.9 1 level and 2012 |
Aspiration | turbocharging and turbocharging and cooling at the outlet |
Gear box
Transmission type | Powershift transmission with direct drive and hydrostatic |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 19 degrees and 30 degrees |
Dump
Mouldboard width | 3658 mm and 3657.6 mm |
Mouldboard height | 622 mm and 558.8 mm |
Left lateral displacement | 533 mm and 793.8 mm |
Lateral right shift | 686 mm and 679.5 mm |
Circle
Diameter | 1753 mm and 1371.6 mm |
Images
Sizes
1. Dimensional length | 8521 mm | 1. Dimensional length | 8345.4 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2532.9 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 2947.4 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 5282.2 mm |
7. Dual axis wheelbase | 1594 mm | 7. Dual axis wheelbase | 1447.8 mm |
8. Blade base | 2562 mm | 8. Blade base | 2362.2 mm |