- Home/
- Comparison/
- Grader/
- New Holland F140 vs. Volvo G780 VHP
New Holland F140 vs. Volvo G780 VHP
7 reasons to buy New Holland F140:
Operation
Hydraulic system fluid volume | 94.6 l. and 90 l. | 5 % more or 4.6 l. |
Motor
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Gear box
Maximum forward speed | 43 km/h and 38.3 km/h | 11 % more or 4.7 km/h |
Maximum reverse gear | 28.5 km/h and 27.4 km/h | 4 % more or 1.1 km/h |
Circle
Right maximum radius outside tyres | 1742 mm and 2298.7 mm | 24 % less or 556.7 mm |
Maximum lifting above ground level | 444 mm and 431.8 mm | 3 % more or 12.2 mm |
Maximum radius outside left tyres | 1582 mm and 2311.4 mm | 32 % less or 729.4 mm |
12 reasons to buy Volvo G780 VHP:
Operation
Generator current strength | 75 amperes and 70 amperes | 7 % more or 5 amperes |
Fuel Capacity | 378.5 l. and 340 l. | 10 % more or 38.5 l. |
Cooling system fluid volume | 50 l. and 40 l. | 20 % more or 10 l. |
Transmission fluid volume | 38 l. and 25 l. | 34 % more or 13 l. |
Each tandem case fluid volume | 105 l. and 30 l. | 71 % more or 75 l. |
Motor
Effective drives torque 7-8 | 1145.7 Nm and 141 Nm | 88 % more or 1004.7 Nm |
Displacement | 10.8 l. and 5.9 l. | 45 % more or 4.9 l. |
Hydraulic system
Pump flow rate | 183 l/min and 192 l/min | 5 % less or 9 l/min |
Front Axle
Clearance | 698 mm and 622 mm | 11 % more or 76 mm |
Dump
Maximum cutting depth | 838.2 mm and 712 mm | 15 % more or 126.2 mm |
Circle
Blade tilt front angle | 46 degrees and 40 degrees | 13 % more or 6 degrees |
Blade tilt rear angle | 13 degrees and 5 degrees | 62 % more or 8 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 22 degrees |
Sizes
Dimensional length | 8521 mm and 8687 mm |
Between tyres width | 2510 mm and 2794 mm |
Wheelbase | 6219 mm and 6248 mm |
Blade base | 2562 mm and 2718 mm |
Height to cab upper part | 3340 mm and 3200 mm |
Operation
Tyre size | 13.00 x 24 (12PR) and 16.00 x 24, G-2 |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Cummins and Cummins |
Model | 6BTA5.9 1 level and M11 |
Hydraulic system
Overflow valve pressure | 17900 kPa and 17236.9 kPa |
Type of pump | full hydraulic system with load sensing and hydraulic system with load sensing |
Gear box
Transmission type | Powershift transmission with direct drive and powershift transmission |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 18 degrees and 18 degrees |
General fluctuations | 19 degrees and 16 degrees |
Dump
Mouldboard thickness | 22 mm and 25.4 mm |
Left lateral displacement | 533 mm and 673.1 mm |
Lateral right shift | 686 mm and 673.1 mm |
Mouldboard width | 3658 mm and 4267.2 mm |
Lowered blade pressure | 8636 kg and 10652.6 kg |
Mouldboard height | 622 mm and 787.4 mm |
Circle
Diameter | 1753 mm and 1692 mm |
Rotating | 360 degrees and 360 degrees |
Images
Sizes
8. Blade base | 2562 mm | 8. Blade base | 2718 mm |
1. Dimensional length | 8521 mm | 1. Dimensional length | 8687 mm |
2. Between tyres width | 2510 mm | 2. Between tyres width | 2794 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6248 mm |