vs.

      New Holland F140 vs. Volvo G780B

      8 reasons to buy New Holland F140:

      Operation

      Cooling system fluid volume 40 l. and 31 l. 22 % more or 9 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev

      Hydraulic system

      Pump flow rate 192 l/min and 284 l/min 32 % less or 92 l/min

      Gear box

      Maximum forward speed 43 km/h and 38.3 km/h 11 % more or 4.7 km/h
      Maximum reverse gear 28.5 km/h and 27.4 km/h 4 % more or 1.1 km/h

      Circle

      Maximum radius outside left tyres 1582 mm and 2311.4 mm 32 % less or 729.4 mm
      Right maximum radius outside tyres 1742 mm and 2298.7 mm 24 % less or 556.7 mm
      Maximum lifting above ground level 444 mm and 431.8 mm 3 % more or 12.2 mm

      11 reasons to buy Volvo G780B:

      Operation

      Fuel Capacity 454 l. and 340 l. 25 % more or 114 l.
      Hydraulic system fluid volume 134 l. and 94.6 l. 29 % more or 39.4 l.
      Transmission fluid volume 38 l. and 25 l. 34 % more or 13 l.
      Each tandem case fluid volume 105 l. and 30 l. 71 % more or 75 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Effective drives torque 7-8 1147 Nm and 141 Nm 88 % more or 1006 Nm
      Displacement 9.6 l. and 5.9 l. 39 % more or 3.7 l.

      Front Axle

      Clearance 698 mm and 622 mm 11 % more or 76 mm

      Dump

      Maximum cutting depth 838.2 mm and 712 mm 15 % more or 126.2 mm

      Circle

      Blade tilt front angle 46 degrees and 40 degrees 13 % more or 6 degrees
      Blade tilt rear angle 13 degrees and 5 degrees 62 % more or 8 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Between tyres width 2510 mm and 2794 mm
      Wheelbase 6219 mm and 6248 mm
      Height to cab upper part 3340 mm and 3200 mm
      Blade base 2562 mm and 2718 mm
      Dimensional length 8521 mm and 9322 mm

      Operation

      Tyre size 13.00 x 24 (12PR) and 16.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Volvo
      Model 6BTA5.9 1 level and D10BGAE2

      Hydraulic system

      Type of pump full hydraulic system with load sensing and hydraulic system with load sensing
      Overflow valve pressure 17900 kPa and 18615.8 kPa

      Gear box

      Forward gears number 8 and 8
      Reverse gears number 4 and 4
      Transmission type Powershift transmission with direct drive and powershift transmission

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 19 degrees and 16 degrees

      Dump

      Left lateral displacement 533 mm and 673.1 mm
      Lateral right shift 686 mm and 673.1 mm
      Lowered blade pressure 8636 kg and 10415.8 kg
      Mouldboard width 3658 mm and 4267.2 mm
      Mouldboard height 622 mm and 787.4 mm
      Mouldboard thickness 22 mm and 25.4 mm

      Circle

      Diameter 1753 mm and 1692 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8521 mm 1. Dimensional length 9322 mm
      2. Between tyres width 2510 mm 2. Between tyres width 2794 mm
      3. Height to cab upper part 3340 mm 3. Height to cab upper part 3200 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6248 mm
      8. Blade base 2562 mm 8. Blade base 2718 mm