vs.

      New Holland G200 vs. John Deere 670C

      14 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 610 mm 2 % more or 12 mm

      Operation

      Front axle standard operating weight 5102.9 kg and 3919 kg 23 % more or 1183.9 kg
      Rear axle standard operating weight 12014.8 kg and 9913 kg 17 % more or 2101.8 kg
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Hydraulic system fluid volume 179.8 l. and 59 l. 67 % more or 120.8 l.

      Motor

      Effective speeds output 7-8 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Maximum power 152.9 kW and 104.4 kW 32 % more or 48.5 kW
      Effective drives torque 7-8 881.3 Nm and 672.5 Nm 24 % more or 208.8 Nm
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Torque measured at 1600 rev / min and 1000 rev / min 37 % more or 600 rev

      Gear box

      Maximum forward speed 43 km/h and 40.2 km/h 7 % more or 2.8 km/h

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm
      Maximum lifting above ground level 445 mm and 444 mm 0 % more or 1 mm

      13 reasons to buy John Deere 670C:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Transmission fluid volume 38 l. and 22 l. 42 % more or 16 l.
      Rear differential/final drive fluid volume 36 l. and 12.1 l. 66 % more or 23.9 l.
      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.
      Each tandem case fluid volume 75 l. and 22.7 l. 70 % more or 52.3 l.
      Fuel Capacity 403 l. and 340.7 l. 15 % more or 62.3 l.
      Cooling system fluid volume 42 l. and 39.7 l. 5 % more or 2.3 l.

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.

      Hydraulic system

      Pump flow rate 173 l/min and 185.5 l/min 7 % less or 12.5 l/min

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 40.2 km/h and 30.6 km/h 24 % more or 9.6 km/h

      Circle

      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees
      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Height to cab upper part 3140 mm and 3100 mm
      Dimensional length 8555 mm and 8580 mm
      Between tyres width 2650 mm and 2490 mm
      Wheelbase 6219 mm and 5970 mm
      Blade base 2562 mm and 2670 mm
      Dual axis wheelbase 1602 mm and 1540 mm

      Operation

      Overall standard operating weight 17117.7 kg and 13832 kg
      Tyre size 14.00x24 10 layers G2 and 13.00-24
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer Cummins and John Deere
      Model QSB 6.7L and 6068H

      Hydraulic system

      Type of pump variable displacement piston pump and variable displacement with locking in the middle position
      Overflow valve pressure 17926.4 kPa and 17581.6 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 19 degrees and 32 degrees
      Wheel tilt 17.5 degrees and 20 degrees

      Dump

      Mouldboard thickness 22 mm and 22 mm
      Mouldboard width 4267.2 mm and 3.7 mm
      Left lateral displacement 533 mm and 683 mm
      Mouldboard height 622 mm and 610 mm
      Lateral right shift 711 mm and 683 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1520 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8555 mm 1. Dimensional length 8580 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2490 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      6. Front part clearance 622 mm 6. Front part clearance 610 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2670 mm