vs.

      New Holland G200 vs. John Deere 770B

      16 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 572 mm 8 % more or 50 mm

      Operation

      Front axle standard operating weight 5102.9 kg and 3946.3 kg 23 % more or 1156.6 kg
      Rear axle standard operating weight 12014.8 kg and 10228.5 kg 15 % more or 1786.3 kg
      Cooling system fluid volume 39.7 l. and 38 l. 4 % more or 1.7 l.
      Hydraulic system fluid volume 179.8 l. and 87 l. 52 % more or 92.8 l.
      Each tandem case fluid volume 22.7 l. and 18.9 l. 17 % more or 3.8 l.
      Generator current strength 80 amperes and 45 amperes 44 % more or 35 amperes

      Motor

      Effective drives torque 7-8 881.3 Nm and 707.7 Nm 20 % more or 173.6 Nm
      Torque measured at 1600 rev / min and 1100 rev / min 31 % more or 500 rev
      Effective speeds output 7-8 152.9 kW and 115.6 kW 24 % more or 37.3 kW
      Maximum power 152.9 kW and 115.6 kW 24 % more or 37.3 kW

      Hydraulic system

      Pump flow rate 185.5 l/min and 198.4 l/min 7 % less or 12.9 l/min

      Gear box

      Maximum forward speed 43 km/h and 40.6 km/h 6 % more or 2.4 km/h
      Maximum reverse gear 30.6 km/h and 13.8 km/h 55 % more or 16.8 km/h

      Front Axle

      Clearance 622 mm and 572 mm 8 % more or 50 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2160 mm 8 % less or 182 mm

      6 reasons to buy John Deere 770B:

      Steerage

      Turn radius 6.7 m and 7289 m 100 % less or 7282.3 m

      Operation

      Circular gearbox fluid volume 3.8 l. and 2.8 l. 26 % more or 1.0 l.

      Motor

      Displacement 7.6 l. and 6.7 l. 12 % more or 0.9 l.

      Circle

      Blade tilt front angle 49 degrees and 42 degrees 14 % more or 7 degrees
      Right maximum radius outside tyres 2110 mm and 2174 mm 3 % less or 64 mm
      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 25 degrees

      Sizes

      Dimensional length 8555 mm and 8510 mm
      Between tyres width 2650 mm and 2440 mm
      Wheelbase 6219 mm and 5970 mm
      Height to cab upper part 3140 mm and 3090 mm
      Blade base 2562 mm and 2670 mm
      Dual axis wheelbase 1602 mm and 1540 mm

      Operation

      Overall standard operating weight 17117.7 kg and 14174.8 kg
      Fuel Capacity 340.7 l. and 340.7 l.
      Tyre size 14.00x24 10 layers G2 and 14.00-24
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and John Deere
      Model QSB 6.7L and 6076T
      Power measured at 2200 rev / min and 2200 rev / min
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume

      Gear box

      Transmission type Powershift transmission with direct drive and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 17.5 degrees and 20 degrees
      General fluctuations 19 degrees and 32 degrees

      Dump

      Mouldboard width 4267.2 mm and 3657.6 mm
      Mouldboard height 622 mm and 609.6 mm
      Mouldboard thickness 22 mm and 22.4 mm
      Left lateral displacement 533 mm and 683 mm
      Lateral right shift 711 mm and 683 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees
      Diameter 1753 mm and 1500 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8555 mm 1. Dimensional length 8510 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2440 mm
      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3090 mm
      4. Wheelbase 6219 mm 4. Wheelbase 5970 mm
      6. Front part clearance 622 mm 6. Front part clearance 572 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1540 mm
      8. Blade base 2562 mm 8. Blade base 2670 mm