vs.

      New Holland G200 vs. Terex TG190

      14 reasons to buy New Holland G200:

      Sizes

      Front part clearance 622 mm and 591 mm 5 % more or 31 mm

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Front axle standard operating weight 5102.9 kg and 5000 kg 2 % more or 102.9 kg
      Hydraulic system fluid volume 179.8 l. and 170 l. 5 % more or 9.8 l.

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev
      Maximum power 152.9 kW and 138 kW 10 % more or 14.9 kW
      Displacement 6.7 l. and 6 l. 10 % more or 0.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 43 km/h and 40 km/h 7 % more or 3 km/h
      Maximum reverse gear 30.6 km/h and 19.4 km/h 37 % more or 11.2 km/h

      Front Axle

      Clearance 622 mm and 591 mm 5 % more or 31 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2220 mm 11 % less or 242 mm
      Right maximum radius outside tyres 2174 mm and 3180 mm 32 % less or 1006 mm

      10 reasons to buy Terex TG190:

      Steerage

      Turn radius 7.5 m and 7289 m 100 % less or 7281.5 m

      Sizes

      Rear ground clearance 474 mm and 378 mm 20 % more or 96 mm

      Operation

      Rear axle standard operating weight 13700 kg and 12014.8 kg 12 % more or 1685.2 kg
      Fuel Capacity 480 l. and 340.7 l. 29 % more or 139.3 l.
      Cooling system fluid volume 42 l. and 39.7 l. 5 % more or 2.3 l.
      Transmission fluid volume 34 l. and 22 l. 35 % more or 12 l.
      Circular gearbox fluid volume 6 l. and 2.8 l. 53 % more or 3.2 l.
      Each tandem case fluid volume 42 l. and 22.7 l. 46 % more or 19.3 l.

      Hydraulic system

      Pump flow rate 99 l/min and 185.5 l/min 47 % less or 86.5 l/min

      Circle

      Maximum lifting above ground level 470 mm and 445 mm 5 % more or 25 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 45 degrees

      Sizes

      Height to cab upper part 3140 mm and 3300 mm
      Dimensional length 8555 mm and 10266 mm
      Between tyres width 2650 mm and 2490 mm
      Wheelbase 6219 mm and 6136 mm
      Blade base 2562 mm and 2638 mm
      Dual axis wheelbase 1602 mm and 1542 mm

      Operation

      Operating voltage 24 V and 24 V
      Overall standard operating weight 17117.7 kg and 18700 kg
      Tyre size 14.00x24 10 layers G2 and 14.00 -24TG

      Motor

      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Cummins

      Hydraulic system

      Type of pump variable displacement piston pump and axial piston pump
      Overflow valve pressure 17926.4 kPa and 18400 kPa

      Gear box

      Transmission type Powershift transmission with direct drive and powershift transmission with torque converter

      Front Axle

      General fluctuations 19 degrees and 15 degrees
      Wheel tilt 17.5 degrees and 17 degrees

      Dump

      Mouldboard height 622 mm and 630 mm
      Mouldboard thickness 22 mm and 20 mm
      Left lateral displacement 533 mm and 1250 mm
      Lateral right shift 711 mm and 1250 mm
      Mouldboard width 4267.2 mm and 3660 mm

      Circle

      Diameter 1753 mm and 1510 mm

      Images

      Sizes

      3. Height to cab upper part 3140 mm 3. Height to cab upper part 3300 mm
      4. Wheelbase 6219 mm 4. Wheelbase 6136 mm
      5. Rear ground clearance 378 mm 5. Rear ground clearance 474 mm
      6. Front part clearance 622 mm 6. Front part clearance 591 mm
      7. Dual axis wheelbase 1602 mm 7. Dual axis wheelbase 1542 mm
      8. Blade base 2562 mm 8. Blade base 2638 mm
      1. Dimensional length 8555 mm 1. Dimensional length 10266 mm
      2. Between tyres width 2650 mm 2. Between tyres width 2490 mm