- Home/
- Comparison/
- Grader/
- Volvo G730 VHP vs. Caterpillar 160M2 AWD
Volvo G730 VHP vs. Caterpillar 160M2 AWD
9 reasons to buy Volvo G730 VHP:
Operation
Each tandem case fluid volume | 100 l. and 64 l. | 36 % more or 36 l. |
Hydraulic system
Pump flow rate | 191 l/min and 210.1 l/min | 9 % less or 19.1 l/min |
Front Axle
Clearance | 610 mm and 600 mm | 2 % more or 10 mm |
Dump
Maximum cutting depth | 812.8 mm and 750 mm | 8 % more or 62.8 mm |
Blade pulling at maximum weight | 9859.3 kg and 9091.8 kg | 8 % more or 767.5 kg |
Circle
Maximum radius outside left tyres | 2019.3 mm and 2090 mm | 3 % less or 70.7 mm |
Right maximum radius outside tyres | 2006.6 mm and 2278 mm | 12 % less or 271.4 mm |
Blade tilt front angle | 44 degrees and 40 degrees | 9 % more or 4 degrees |
Blade tilt rear angle | 6.5 degrees and 5 degrees | 23 % more or 1.5 degrees |
13 reasons to buy Caterpillar 160M2 AWD:
Operation
Cooling system fluid volume | 56 l. and 47 l. | 16 % more or 9 l. |
Hydraulic system fluid volume | 99.9 l. and 90 l. | 10 % more or 9.9 l. |
Transmission fluid volume | 65.1 l. and 38 l. | 42 % more or 27.1 l. |
Generator current strength | 150 amperes and 75 amperes | 50 % more or 75 amperes |
Front axle standard operating weight | 5805.1 kg and 4806 kg | 17 % more or 999.1 kg |
Rear axle standard operating weight | 14707.3 kg and 10957 kg | 25 % more or 3750.3 kg |
Fuel Capacity | 416.4 l. and 378.5 l. | 9 % more or 37.9 l. |
Motor
Effective speeds output 7-8 | 211 kW and 160.3 kW | 24 % more or 50.7 kW |
Effective drives torque 7-8 | 1355.8 Nm and 964 Nm | 29 % more or 391.8 Nm |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 46.7 km/h and 45.9 km/h | 2 % more or 0.8 km/h |
Maximum reverse gear | 36.9 km/h and 32.8 km/h | 11 % more or 4.1 km/h |
Circle
Maximum lifting above ground level | 452 mm and 444.5 mm | 2 % more or 7.5 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 20 degrees |
Sizes
Wheelbase | 6096 mm and 6126 mm |
Dimensional length | 8484 mm and 8898 mm |
Blade base | 2591 mm and 2557 mm |
Between tyres width | 2540 mm and 2581 mm |
Height to cab upper part | 3099 mm and 3287 mm |
Operation
Operating voltage | 24 V and 24 V |
Overall standard operating weight | 15763 kg and 20511.9 kg |
Motor
Manufacturer | Cummins and Caterpillar |
Model | 6C8.3 and C9.3 ACERT VHP |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement piston pump |
Overflow valve pressure | 17236.9 kPa and 24152.3 kPa |
Gear box
Transmission type | powershift transmission and Powershift transmission with direct drive |
Forward gears number | 8 and 8 |
Front Axle
General fluctuations | 16 degrees and 32 degrees |
Wheel tilt | 18 degrees and 18 degrees |
Dump
Mouldboard thickness | 22.2 mm and 22 mm |
Left lateral displacement | 673.1 mm and 510 mm |
Lowered blade pressure | 8357.9 kg and 10380 kg |
Lateral right shift | 673.1 mm and 660 mm |
Mouldboard width | 3657.6 mm and 4267.2 mm |
Mouldboard height | 635 mm and 609.6 mm |
Circle
Diameter | 1683 mm and 1530 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 774.7 mm and 695 mm |
Right shift | 749.3 mm and 728 mm |
Images
Sizes
1. Dimensional length | 8484 mm | 1. Dimensional length | 8898 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2581 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3287 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 6126 mm |
8. Blade base | 2591 mm | 8. Blade base | 2557 mm |