- Home/
- Comparison/
- Grader/
- Volvo G730 VHP vs. Caterpillar 24H ES
Volvo G730 VHP vs. Caterpillar 24H ES
4 reasons to buy Volvo G730 VHP:
Hydraulic system
Pump flow rate | 191 l/min and 508 l/min | 62 % less or 317 l/min |
Gear box
Forward gears number | 8 and 6 | 25 % more or 2 |
Reverse gears number | 4 and 3 | 25 % more or 1 |
Maximum forward speed | 45.9 km/h and 37.7 km/h | 18 % more or 8.2 km/h |
7 reasons to buy Caterpillar 24H ES:
Operation
Hydraulic system fluid volume | 250 l. and 90 l. | 64 % more or 160 l. |
Fuel Capacity | 1207 l. and 378.5 l. | 69 % more or 828.5 l. |
Generator current strength | 100 amperes and 75 amperes | 25 % more or 25 amperes |
Motor
Maximum power | 372.9 kW and 160.3 kW | 57 % more or 212.6 kW |
Displacement | 27 l. and 8.3 l. | 69 % more or 18.7 l. |
Gear box
Maximum reverse gear | 36.1 km/h and 32.8 km/h | 9 % more or 3.3 km/h |
Circle
Maximum lifting above ground level | 634 mm and 444.5 mm | 30 % more or 189.5 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 25 degrees |
Sizes
Height to cab upper part | 3099 mm and 4350 mm |
Dimensional length | 8484 mm and 14160 mm |
Between tyres width | 2540 mm and 4230 mm |
Wheelbase | 6096 mm and 10230 mm |
Blade base | 2591 mm and 4080 mm |
Operation
Overall standard operating weight | 15763 kg and 61950 kg |
Tyre size | 14.00 x 24, G-2 and 29.5-29 |
Operating voltage | 24 V and 24 V |
Motor
Model | 6C8.3 and 3412E HEUI |
Manufacturer | Cummins and Caterpillar |
Hydraulic system
Type of pump | hydraulic system with load sensing and Axial-piston pump |
Overflow valve pressure | 17236.9 kPa and 24131.6 kPa |
Front Axle
General fluctuations | 16 degrees and 32 degrees |
Wheel tilt | 18 degrees and 18 degrees |
Dump
Mouldboard width | 3657.6 mm and 7320 mm |
Mouldboard height | 635 mm and 1067 mm |
Mouldboard thickness | 22.2 mm and 51 mm |
Images
Sizes
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 4350 mm |
4. Wheelbase | 6096 mm | 4. Wheelbase | 10230 mm |
8. Blade base | 2591 mm | 8. Blade base | 4080 mm |
1. Dimensional length | 8484 mm | 1. Dimensional length | 14160 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 4230 mm |