vs.

      Volvo G730 VHP vs. John Deere 672B

      16 reasons to buy Volvo G730 VHP:

      Operation

      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.
      Cooling system fluid volume 47 l. and 26.5 l. 44 % more or 20.5 l.
      Front axle standard operating weight 4806 kg and 3946 kg 18 % more or 860 kg
      Hydraulic system fluid volume 90 l. and 53 l. 41 % more or 37 l.
      Rear axle standard operating weight 10957 kg and 8800 kg 20 % more or 2157 kg
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes

      Motor

      Effective speeds output 7-8 160.3 kW and 100.7 kW 37 % more or 59.6 kW
      Maximum power 160.3 kW and 100.7 kW 37 % more or 59.6 kW
      Effective drives torque 7-8 964 Nm and 542.3 Nm 44 % more or 421.7 Nm
      Displacement 8.3 l. and 6.8 l. 18 % more or 1.5 l.

      Gear box

      Maximum forward speed 45.9 km/h and 39.3 km/h 14 % more or 6.6 km/h
      Maximum reverse gear 32.8 km/h and 13.2 km/h 60 % more or 19.6 km/h

      Front Axle

      Clearance 610 mm and 559 mm 8 % more or 51 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2080 mm 3 % less or 60.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2110 mm 5 % less or 103.4 mm

      3 reasons to buy John Deere 672B:

      Hydraulic system

      Pump flow rate 142.3 l/min and 191 l/min 25 % less or 48.7 l/min

      Circle

      Maximum lifting above ground level 483 mm and 444.5 mm 8 % more or 38.5 mm
      Blade tilt rear angle 10 degrees and 6.5 degrees 35 % more or 3.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Dimensional length 8484 mm and 8310 mm
      Between tyres width 2540 mm and 2390 mm
      Wheelbase 6096 mm and 5970 mm
      Blade base 2591 mm and 2570 mm
      Height to cab upper part 3099 mm and 3070 mm

      Operation

      Overall standard operating weight 15763 kg and 12746 kg
      Tyre size 14.00 x 24, G-2 and 13.00-24
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and John Deere
      Model 6C8.3 and 6414 T

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement with locking in the middle position

      Gear box

      Transmission type powershift transmission and powershift
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 32 degrees
      Wheel tilt 18 degrees and 20 degrees

      Dump

      Lateral right shift 673.1 mm and 683 mm
      Mouldboard width 3657.6 mm and 3.7 mm
      Mouldboard height 635 mm and 610 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Left lateral displacement 673.1 mm and 683 mm

      Circle

      Diameter 1683 mm and 1470 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 724 mm
      Right shift 749.3 mm and 686 mm
      Blade tilt front angle 44 degrees and 44 degrees

      Images

      Sizes

      4. Wheelbase 6096 mm 4. Wheelbase 5970 mm
      8. Blade base 2591 mm 8. Blade base 2570 mm
      1. Dimensional length 8484 mm 1. Dimensional length 8310 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2390 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3070 mm