vs.

      Volvo G730 VHP vs. John Deere 770D

      11 reasons to buy Volvo G730 VHP:

      Operation

      Hydraulic system fluid volume 90 l. and 53 l. 41 % more or 37 l.
      Transmission fluid volume 38 l. and 22.7 l. 40 % more or 15.3 l.
      Front axle standard operating weight 4806 kg and 3860 kg 20 % more or 946 kg
      Each tandem case fluid volume 100 l. and 75.7 l. 24 % more or 24.3 l.

      Motor

      Displacement 8.3 l. and 8.1 l. 2 % more or 0.2 l.

      Hydraulic system

      Pump flow rate 191 l/min and 207 l/min 8 % less or 16 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 41.6 km/h 9 % more or 4.3 km/h

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2100 mm 4 % less or 80.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2080 mm 4 % less or 73.4 mm
      Blade tilt front angle 44 degrees and 42 degrees 5 % more or 2 degrees
      Blade tilt rear angle 6.5 degrees and 5 degrees 23 % more or 1.5 degrees

      11 reasons to buy John Deere 770D:

      Operation

      Generator current strength 100 amperes and 75 amperes 25 % more or 25 amperes
      Rear differential/final drive fluid volume 36 l. and 23 l. 36 % more or 13 l.
      Rear axle standard operating weight 10959 kg and 10957 kg 0 % more or 2 kg
      Fuel Capacity 401.2 l. and 378.5 l. 6 % more or 22.7 l.
      Cooling system fluid volume 49.2 l. and 47 l. 4 % more or 2.2 l.

      Motor

      Effective drives torque 7-8 1223 Nm and 964 Nm 21 % more or 259 Nm

      Gear box

      Reverse gears number 8 and 4 50 % more or 4
      Maximum reverse gear 41.6 km/h and 32.8 km/h 21 % more or 8.8 km/h

      Front Axle

      Clearance 638 mm and 610 mm 4 % more or 28 mm

      Dump

      Blade pulling at maximum weight 13149 kg and 9859.3 kg 25 % more or 3289.7 kg

      Circle

      Maximum lifting above ground level 470 mm and 444.5 mm 5 % more or 25.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 22 degrees

      Sizes

      Wheelbase 6096 mm and 6120 mm
      Blade base 2591 mm and 2568 mm
      Height to cab upper part 3099 mm and 3180 mm
      Dimensional length 8484 mm and 8804 mm
      Between tyres width 2540 mm and 2510 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 14.00 x 24, G-2 and 14.00R24 Radial PR
      Overall standard operating weight 15763 kg and 14819 kg

      Motor

      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Cummins and John Deere
      Model 6C8.3 and 6081H
      Effective speeds output 7-8 160.3 kW and 160.3 kW
      Maximum power 160.3 kW and 160.3 kW

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17236.9 kPa and 18960.6 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 32 degrees

      Dump

      Left lateral displacement 673.1 mm and 680 mm
      Mouldboard thickness 22.2 mm and 22 mm
      Lateral right shift 673.1 mm and 680 mm
      Mouldboard width 3657.6 mm and 3660 mm
      Mouldboard height 635 mm and 610 mm

      Circle

      Diameter 1683 mm and 1520 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 787 mm
      Right shift 749.3 mm and 724 mm

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 8804 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3180 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6120 mm
      8. Blade base 2591 mm 8. Blade base 2568 mm