vs.

      Volvo G730 VHP vs. New Holland G140

      14 reasons to buy Volvo G730 VHP:

      Operation

      Rear axle standard operating weight 10957 kg and 9863.8 kg 10 % more or 1093.2 kg
      Front axle standard operating weight 4806 kg and 3706.8 kg 23 % more or 1099.2 kg
      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 47 l. and 39.7 l. 16 % more or 7.3 l.
      Transmission fluid volume 38 l. and 17.8 l. 53 % more or 20.2 l.
      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.

      Motor

      Displacement 8.3 l. and 6.7 l. 19 % more or 1.6 l.
      Effective speeds output 7-8 160.3 kW and 119.3 kW 26 % more or 41.0 kW
      Maximum power 160.3 kW and 119.3 kW 26 % more or 41.0 kW
      Effective drives torque 7-8 964 Nm and 746 Nm 23 % more or 218 Nm

      Gear box

      Maximum forward speed 45.9 km/h and 42.8 km/h 7 % more or 3.1 km/h
      Maximum reverse gear 32.8 km/h and 28.5 km/h 13 % more or 4.3 km/h

      Circle

      Right maximum radius outside tyres 2006.6 mm and 2174 mm 8 % less or 167.4 mm
      Blade tilt front angle 44 degrees and 5 degrees 89 % more or 39 degrees

      7 reasons to buy New Holland G140:

      Operation

      Hydraulic system fluid volume 179.8 l. and 90 l. 50 % more or 89.8 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes

      Hydraulic system

      Pump flow rate 185.5 l/min and 191 l/min 3 % less or 5.5 l/min

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum radius outside left tyres 1978 mm and 2019.3 mm 2 % less or 41.3 mm
      Maximum lifting above ground level 445 mm and 444.5 mm 0 % more or 0.5 mm
      Blade tilt rear angle 42 degrees and 6.5 degrees 85 % more or 35.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3140 mm
      Wheelbase 6096 mm and 6219 mm
      Blade base 2591 mm and 2562 mm
      Dimensional length 8484 mm and 8521 mm
      Between tyres width 2540 mm and 2510 mm

      Operation

      Overall standard operating weight 15763 kg and 13570.6 kg
      Tyre size 14.00 x 24, G-2 and 14.00X24 10 layers G2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Cummins
      Model 6C8.3 and QSB 6.7L

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17236.9 kPa and 17926.4 kPa

      Gear box

      Reverse gears number 4 and 4
      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Lowered blade pressure 8357.9 kg and 6707.7 kg
      Left lateral displacement 673.1 mm and 533 mm
      Lateral right shift 673.1 mm and 711 mm
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 622 mm
      Mouldboard thickness 22.2 mm and 22 mm

      Circle

      Diameter 1683 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6219 mm
      8. Blade base 2591 mm 8. Blade base 2562 mm