vs.

      Volvo G730 VHP vs. Volvo G970

      6 reasons to buy Volvo G730 VHP:

      Hydraulic system

      Pump flow rate 191 l/min and 208 l/min 8 % less or 17 l/min

      Gear box

      Maximum forward speed 45.9 km/h and 43.8 km/h 5 % more or 2.1 km/h
      Maximum reverse gear 32.8 km/h and 30.1 km/h 8 % more or 2.7 km/h

      Front Axle

      Clearance 610 mm and 590 mm 3 % more or 20 mm

      Dump

      Maximum cutting depth 812.8 mm and 775 mm 5 % more or 37.8 mm

      Circle

      Blade tilt rear angle 6.5 degrees and 6 degrees 8 % more or 0.5 degrees

      14 reasons to buy Volvo G970:

      Operation

      Fuel Capacity 498 l. and 378.5 l. 24 % more or 119.5 l.
      Hydraulic system fluid volume 91 l. and 90 l. 1 % more or 1 l.
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Front axle standard operating weight 5300 kg and 4806 kg 9 % more or 494 kg
      Rear axle standard operating weight 13600 kg and 10957 kg 19 % more or 2643 kg

      Motor

      Effective speeds output 7-8 195.4 kW and 160.3 kW 18 % more or 35.1 kW
      Maximum power 195.4 kW and 160.3 kW 18 % more or 35.1 kW
      Effective drives torque 7-8 1188 Nm and 964 Nm 19 % more or 224 Nm
      Displacement 9.4 l. and 8.3 l. 12 % more or 1.1 l.

      Dump

      Blade pulling at maximum weight 13923 kg and 9859.3 kg 29 % more or 4063.7 kg

      Circle

      Maximum radius outside left tyres 1970 mm and 2019.3 mm 2 % less or 49.3 mm
      Right maximum radius outside tyres 1960 mm and 2006.6 mm 2 % less or 46.6 mm
      Blade tilt front angle 45 degrees and 44 degrees 2 % more or 1 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 21 degrees

      Sizes

      Blade base 2591 mm and 2790 mm
      Height to cab upper part 3099 mm and 3225 mm
      Dimensional length 8484 mm and 9500 mm
      Between tyres width 2540 mm and 2780 mm
      Wheelbase 6096 mm and 6531 mm

      Operation

      Cooling system fluid volume 47 l. and 47 l.
      Each tandem case fluid volume 100 l. and 100 l.
      Tyre size 14.00 x 24, G-2 and 14:00 x 24, G-2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 15763 kg and 18900 kg

      Motor

      Manufacturer Cummins and Volvo
      Model 6C8.3 and D9B
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump hydraulic system with load sensing and axial piston pump
      Overflow valve pressure 17236.9 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift transmission and HTE 840, Sequential direct drive gearbox with shifting under load Volvo
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 16 degrees and 16 degrees
      Wheel tilt 18 degrees and 18 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 737 mm
      Mouldboard thickness 22.2 mm and 25 mm
      Left lateral displacement 673.1 mm and 673 mm
      Lateral right shift 673.1 mm and 673 mm
      Lowered blade pressure 8357.9 kg and 9253 kg

      Circle

      Right shift 749.3 mm and 749 mm
      Diameter 1683 mm and 1626 mm
      Rotating 360 degrees and 360 degrees
      Left shift 774.7 mm and 775 mm

      Images

      Sizes

      1. Dimensional length 8484 mm 1. Dimensional length 9500 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2780 mm
      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3225 mm
      4. Wheelbase 6096 mm 4. Wheelbase 6531 mm
      8. Blade base 2591 mm 8. Blade base 2790 mm