vs.

      Volvo G740 vs. Case 845B DHP

      12 reasons to buy Volvo G740:

      Operation

      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 50 l. and 39.7 l. 21 % more or 10.3 l.
      Front axle standard operating weight 4851 kg and 4496 kg 7 % more or 355 kg
      Rear axle standard operating weight 11302 kg and 10109.2 kg 11 % more or 1192.8 kg
      Each tandem case fluid volume 100 l. and 60.2 l. 40 % more or 39.8 l.

      Motor

      Effective speeds output 7-8 156.6 kW and 119.3 kW 24 % more or 37.3 kW
      Effective drives torque 7-8 1030.4 Nm and 759.3 Nm 26 % more or 271.1 Nm
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.

      Hydraulic system

      Pump flow rate 183 l/min and 185.5 l/min 1 % less or 2.5 l/min

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Dump

      Maximum cutting depth 800.1 mm and 711.2 mm 11 % more or 88.9 mm

      7 reasons to buy Case 845B DHP:

      Operation

      Generator current strength 90 amperes and 75 amperes 17 % more or 15 amperes
      Hydraulic system fluid volume 179.8 l. and 90 l. 50 % more or 89.8 l.
      Transmission fluid volume 79.5 l. and 38 l. 52 % more or 41.5 l.
      Rear differential/final drive fluid volume 39.7 l. and 23 l. 42 % more or 16.7 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Circle

      Maximum lifting above ground level 444.5 mm and 436.9 mm 2 % more or 7.6 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Wheelbase 6248 mm and 6219 mm
      Height to cab upper part 3099 mm and 3340 mm
      Blade base 2718 mm and 2562 mm
      Dimensional length 8636 mm and 8534.4 mm
      Between tyres width 2540 mm and 2499 mm

      Operation

      Overall standard operating weight 16153 kg and 14605.2 kg
      Operating voltage 24 V and 24 V
      Tyre size 14.00 x 24, G-2 and 14.0 x 24-10 PR

      Motor

      Aspiration turbocharging and Turbocharged engine with subsequent cooling of charging air by oncoming air flow
      Manufacturer Cummins and Case
      Model M11 and FPT 6.7L

      Hydraulic system

      Type of pump hydraulic system with load sensing and piston type with load sensing

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 20 degrees
      General fluctuations 16 degrees and 15.3 degrees

      Dump

      Mouldboard height 736.6 mm and 558.8 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 533.4 mm
      Lateral right shift 673.1 mm and 685.8 mm
      Lowered blade pressure 8574.7 kg and 7644.8 kg
      Mouldboard width 4572 mm and 3657.6 mm

      Circle

      Diameter 1683 mm and 1752.6 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3340 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6219 mm
      8. Blade base 2718 mm 8. Blade base 2562 mm
      1. Dimensional length 8636 mm 1. Dimensional length 8534.4 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2499 mm