vs.

      Volvo G740 vs. Caterpillar 120M

      14 reasons to buy Volvo G740:

      Operation

      Hydraulic system fluid volume 90 l. and 60 l. 33 % more or 30 l.
      Each tandem case fluid volume 100 l. and 61 l. 39 % more or 39 l.
      Front axle standard operating weight 4851 kg and 3735 kg 23 % more or 1116 kg
      Rear axle standard operating weight 11302 kg and 10358 kg 8 % more or 944 kg
      Fuel Capacity 378.5 l. and 340 l. 10 % more or 38.5 l.
      Cooling system fluid volume 50 l. and 40 l. 20 % more or 10 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Effective speeds output 7-8 156.6 kW and 102.9 kW 34 % more or 53.7 kW
      Maximum power 156.6 kW and 102.9 kW 34 % more or 53.7 kW
      Displacement 10.8 l. and 6.6 l. 39 % more or 4.2 l.

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Dump

      Maximum cutting depth 800.1 mm and 720 mm 10 % more or 80.1 mm

      Circle

      Maximum lifting above ground level 436.9 mm and 427 mm 2 % more or 9.9 mm
      Blade tilt front angle 44 degrees and 40 degrees 9 % more or 4 degrees

      9 reasons to buy Caterpillar 120M:

      Operation

      Rear differential/final drive fluid volume 50 l. and 23 l. 54 % more or 27 l.

      Hydraulic system

      Pump flow rate 151 l/min and 183 l/min 17 % less or 32 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum forward speed 44.5 km/h and 43.8 km/h 2 % more or 0.7 km/h
      Maximum reverse gear 37.8 km/h and 31.4 km/h 17 % more or 6.4 km/h

      Dump

      Blade pulling at maximum weight 18244 kg and 10171.4 kg 44 % more or 8072.6 kg

      Circle

      Maximum radius outside left tyres 1742 mm and 2019.3 mm 14 % less or 277.3 mm
      Right maximum radius outside tyres 1905 mm and 2006.6 mm 5 % less or 101.6 mm
      Blade tilt rear angle 5 degrees and 2.5 degrees 50 % more or 2.5 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 20 degrees

      Sizes

      Wheelbase 6248 mm and 5915 mm
      Blade base 2718 mm and 2511 mm
      Height to cab upper part 3099 mm and 3278 mm
      Dimensional length 8636 mm and 8488 mm
      Between tyres width 2540 mm and 2481 mm

      Operation

      Overall standard operating weight 16153 kg and 14093 kg

      Motor

      Model M11 and C6.6 ACERT VHP
      Manufacturer Cummins and Caterpillar

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17236.9 kPa and 24100 kPa

      Gear box

      Transmission type powershift transmission and direct drive, powershift, camshaft
      Forward gears number 8 and 8

      Front Axle

      General fluctuations 16 degrees and 32 degrees
      Wheel tilt 18 degrees and 18 degrees

      Dump

      Left lateral displacement 673.1 mm and 510 mm
      Mouldboard height 736.6 mm and 610 mm
      Lateral right shift 673.1 mm and 660 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Lowered blade pressure 8574.7 kg and 13103 kg
      Mouldboard width 4572 mm and 3668 mm

      Circle

      Right shift 749.3 mm and 656 mm
      Diameter 1683 mm and 1530 mm
      Left shift 774.7 mm and 656 mm

      Images

      Sizes

      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3278 mm
      4. Wheelbase 6248 mm 4. Wheelbase 5915 mm
      8. Blade base 2718 mm 8. Blade base 2511 mm
      1. Dimensional length 8636 mm 1. Dimensional length 8488 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2481 mm