- Home/
- Comparison/
- Grader/
- Volvo G740 vs. John Deere 672A
Volvo G740 vs. John Deere 672A
17 reasons to buy Volvo G740:
Operation
Front axle standard operating weight | 4851 kg and 3947 kg | 19 % more or 904 kg |
Fuel Capacity | 378.5 l. and 227 l. | 40 % more or 151.5 l. |
Rear axle standard operating weight | 11302 kg and 8460 kg | 25 % more or 2842 kg |
Cooling system fluid volume | 50 l. and 26.5 l. | 47 % more or 23.5 l. |
Each tandem case fluid volume | 100 l. and 18.9 l. | 81 % more or 81.1 l. |
Generator current strength | 75 amperes and 42 amperes | 44 % more or 33 amperes |
Motor
Effective speeds output 7-8 | 156.6 kW and 93.2 kW | 40 % more or 63.4 kW |
Maximum power | 156.6 kW and 93.2 kW | 40 % more or 63.4 kW |
Effective drives torque 7-8 | 1030.4 Nm and 504.4 Nm | 51 % more or 526.0 Nm |
Displacement | 10.8 l. and 6.8 l. | 37 % more or 4.0 l. |
Gear box
Maximum forward speed | 43.8 km/h and 38.5 km/h | 12 % more or 5.3 km/h |
Maximum reverse gear | 31.4 km/h and 12.2 km/h | 61 % more or 19.2 km/h |
Front Axle
Clearance | 610 mm and 559 mm | 8 % more or 51 mm |
Dump
Maximum cutting depth | 800.1 mm and 152 mm | 81 % more or 648.1 mm |
Circle
Maximum radius outside left tyres | 2019.3 mm and 2220 mm | 9 % less or 200.7 mm |
Right maximum radius outside tyres | 2006.6 mm and 2150 mm | 7 % less or 143.4 mm |
Maximum lifting above ground level | 436.9 mm and 409 mm | 6 % more or 27.9 mm |
4 reasons to buy John Deere 672A:
Operation
Hydraulic system fluid volume | 143.8 l. and 90 l. | 37 % more or 53.8 l. |
Motor
Power measured at | 2300 rev / min and 2100 rev / min | 9 % more or 200 rev |
Hydraulic system
Pump flow rate | 142.3 l/min and 183 l/min | 22 % less or 40.7 l/min |
Circle
Blade tilt rear angle | 10 degrees and 2.5 degrees | 75 % more or 7.5 degrees |
Neutral reasons:
Steerage
Left and right hinge connection | 22 degrees and 25 degrees |
Sizes
Blade base | 2718 mm and 2540 mm |
Between tyres width | 2540 mm and 2390 mm |
Wheelbase | 6248 mm and 5970 mm |
Height to cab upper part | 3099 mm and 3200 mm |
Dimensional length | 8636 mm and 8310 mm |
Operation
Overall standard operating weight | 16153 kg and 12407 kg |
Tyre size | 14.00 x 24, G-2 and 13.00-24 |
Operating voltage | 24 V and 25 V |
Motor
Manufacturer | Cummins and John Deere |
Model | M11 and 6-414T |
Torque measured at | 1300 rev / min and 1300 rev / min |
Aspiration | turbocharging and turbocharging |
Hydraulic system
Type of pump | hydraulic system with load sensing and variable displacement with locking in the middle position |
Gear box
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Transmission type | powershift transmission and powershift transmission |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 16 degrees and 30 degrees |
Dump
Lateral right shift | 673.1 mm and 683 mm |
Mouldboard width | 4572 mm and 3.7 mm |
Mouldboard height | 736.6 mm and 610 mm |
Mouldboard thickness | 25.4 mm and 22 mm |
Left lateral displacement | 673.1 mm and 683 mm |
Circle
Diameter | 1683 mm and 1.5 mm |
Rotating | 360 degrees and 360 degrees |
Left shift | 774.7 mm and 874 mm |
Right shift | 749.3 mm and 762 mm |
Blade tilt front angle | 44 degrees and 44 degrees |
Images
Sizes
1. Dimensional length | 8636 mm | 1. Dimensional length | 8310 mm |
2. Between tyres width | 2540 mm | 2. Between tyres width | 2390 mm |
3. Height to cab upper part | 3099 mm | 3. Height to cab upper part | 3200 mm |
4. Wheelbase | 6248 mm | 4. Wheelbase | 5970 mm |
8. Blade base | 2718 mm | 8. Blade base | 2540 mm |