vs.

      Volvo G740 vs. New Holland G170

      15 reasons to buy Volvo G740:

      Operation

      Each tandem case fluid volume 100 l. and 29.1 l. 71 % more or 70.9 l.
      Front axle standard operating weight 4851 kg and 4250.2 kg 12 % more or 600.8 kg
      Rear axle standard operating weight 11302 kg and 10169.1 kg 10 % more or 1132.9 kg
      Fuel Capacity 378.5 l. and 340.7 l. 10 % more or 37.8 l.
      Cooling system fluid volume 50 l. and 39.7 l. 21 % more or 10.3 l.
      Transmission fluid volume 38 l. and 18.9 l. 50 % more or 19.1 l.

      Motor

      Maximum power 156.6 kW and 152.9 kW 2 % more or 3.7 kW
      Effective drives torque 7-8 1030.4 Nm and 885.3 Nm 14 % more or 145.1 Nm
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.
      Effective speeds output 7-8 156.6 kW and 152.9 kW 2 % more or 3.7 kW

      Hydraulic system

      Pump flow rate 183 l/min and 185.5 l/min 1 % less or 2.5 l/min

      Gear box

      Maximum forward speed 43.8 km/h and 42.8 km/h 2 % more or 1.0 km/h
      Maximum reverse gear 31.4 km/h and 28.5 km/h 9 % more or 2.9 km/h

      Circle

      Blade tilt front angle 44 degrees and 42 degrees 5 % more or 2 degrees
      Right maximum radius outside tyres 2006.6 mm and 2174 mm 8 % less or 167.4 mm

      9 reasons to buy New Holland G170:

      Operation

      Rear differential/final drive fluid volume 29.1 l. and 23 l. 21 % more or 6.1 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 179.8 l. and 90 l. 50 % more or 89.8 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Front Axle

      Clearance 622 mm and 610 mm 2 % more or 12 mm

      Circle

      Maximum lifting above ground level 445 mm and 436.9 mm 2 % more or 8.1 mm
      Blade tilt rear angle 5 degrees and 2.5 degrees 50 % more or 2.5 degrees
      Maximum radius outside left tyres 1978 mm and 2019.3 mm 2 % less or 41.3 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 25 degrees

      Sizes

      Height to cab upper part 3099 mm and 3140 mm
      Dimensional length 8636 mm and 8521 mm
      Between tyres width 2540 mm and 2510 mm
      Wheelbase 6248 mm and 6219 mm
      Blade base 2718 mm and 2562 mm

      Operation

      Tyre size 14.00 x 24, G-2 and 14.00x24 10 layers G2
      Operating voltage 24 V and 24 V
      Overall standard operating weight 16153 kg and 14549.9 kg

      Motor

      Model M11 and QSB 6.7L
      Aspiration turbocharging and turbocharging
      Manufacturer Cummins and Cummins

      Hydraulic system

      Type of pump hydraulic system with load sensing and variable displacement piston pump
      Overflow valve pressure 17236.9 kPa and 17926.4 kPa

      Gear box

      Transmission type powershift transmission and Powershift transmission with direct drive
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 17.5 degrees
      General fluctuations 16 degrees and 19 degrees

      Dump

      Lowered blade pressure 8574.7 kg and 7286.1 kg
      Mouldboard width 4572 mm and 4267.2 mm
      Mouldboard height 736.6 mm and 622 mm
      Mouldboard thickness 25.4 mm and 22 mm
      Left lateral displacement 673.1 mm and 533 mm
      Lateral right shift 673.1 mm and 711 mm

      Circle

      Diameter 1683 mm and 1753 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      3. Height to cab upper part 3099 mm 3. Height to cab upper part 3140 mm
      4. Wheelbase 6248 mm 4. Wheelbase 6219 mm
      8. Blade base 2718 mm 8. Blade base 2562 mm
      1. Dimensional length 8636 mm 1. Dimensional length 8521 mm
      2. Between tyres width 2540 mm 2. Between tyres width 2510 mm