vs.

      Volvo G946 vs. Volvo G710B

      18 reasons to buy Volvo G946:

      Operation

      Front axle standard operating weight 5000 kg and 4394 kg 12 % more or 606 kg
      Transmission fluid volume 61 l. and 38 l. 38 % more or 23 l.
      Rear axle standard operating weight 12300 kg and 10757 kg 13 % more or 1543 kg
      Fuel Capacity 404 l. and 378.5 l. 6 % more or 25.5 l.
      Generator current strength 80 amperes and 75 amperes 6 % more or 5 amperes
      Hydraulic system fluid volume 144 l. and 134 l. 7 % more or 10 l.

      Motor

      Effective speeds output 7-8 167.8 kW and 129 kW 23 % more or 38.8 kW
      Maximum power 167.8 kW and 129 kW 23 % more or 38.8 kW
      Effective drives torque 7-8 1023 Nm and 801.3 Nm 22 % more or 221.7 Nm
      Displacement 7.2 l. and 7.1 l. 1 % more or 0.1 l.
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump flow rate 208 l/min and 284 l/min 27 % less or 76 l/min

      Gear box

      Maximum reverse gear 32 km/h and 28.6 km/h 11 % more or 3.4 km/h
      Maximum forward speed 45.4 km/h and 40.1 km/h 12 % more or 5.3 km/h

      Front Axle

      Clearance 610 mm and 597 mm 2 % more or 13 mm

      Dump

      Blade pulling at maximum weight 16671 kg and 9143.1 kg 45 % more or 7527.9 kg

      Circle

      Right maximum radius outside tyres 2010 mm and 2044.7 mm 2 % less or 34.7 mm
      Blade tilt rear angle 6 degrees and 5 degrees 17 % more or 1 degrees

      5 reasons to buy Volvo G710B:

      Operation

      Cooling system fluid volume 47 l. and 34 l. 28 % more or 13 l.

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Dump

      Maximum cutting depth 812.8 mm and 790 mm 3 % more or 22.8 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2020 mm 0 % less or 0.7 mm
      Blade tilt front angle 47 degrees and 45 degrees 4 % more or 2 degrees

      Neutral reasons:

      Steerage

      Left and right hinge connection 23 degrees and 22 degrees

      Sizes

      Height to cab upper part 3225 mm and 3073 mm
      Dimensional length 9150 mm and 9093 mm
      Between tyres width 2537 mm and 2489 mm
      Wheelbase 6280 mm and 6096 mm
      Blade base 2650 mm and 2616 mm

      Operation

      Each tandem case fluid volume 100 l. and 100 l.
      Overall standard operating weight 17300 kg and 15150 kg
      Tyre size 14:00 x 24, G-2 and 13.00 x 24, G-2
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging
      Manufacturer Volvo and Volvo
      Model D7E and D7DGAE2

      Hydraulic system

      Type of pump axial piston pump and hydraulic system with load sensing
      Overflow valve pressure 20684.3 kPa and 18615.8 kPa

      Gear box

      Transmission type HTE 840, Sequential direct drive gearbox with shifting under load Volvo and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 18 degrees and 18 degrees
      General fluctuations 16 degrees and 16 degrees

      Dump

      Lowered blade pressure 8650 kg and 7696.6 kg
      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 635 mm and 635 mm
      Mouldboard thickness 22 mm and 22.2 mm
      Left lateral displacement 673 mm and 673.1 mm
      Lateral right shift 673 mm and 673.1 mm

      Circle

      Left shift 775 mm and 774.7 mm
      Diameter 1626 mm and 1683 mm
      Right shift 749 mm and 749.3 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 9150 mm 1. Dimensional length 9093 mm
      2. Between tyres width 2537 mm 2. Between tyres width 2489 mm
      3. Height to cab upper part 3225 mm 3. Height to cab upper part 3073 mm
      4. Wheelbase 6280 mm 4. Wheelbase 6096 mm
      8. Blade base 2650 mm 8. Blade base 2616 mm