vs.

      Case 440CT serie 3 vs. Mustang MTL25

      10 reasons to buy Case 440CT serie 3:

      Sizes

      Ground clearance at maximum lifting and unloading 2430 mm and 2375 mm 2 % more or 55 mm
      Machine rear swing radius from center 1450 mm and 1816 mm 20 % less or 366 mm
      Turning radius with bucket from center 2020 mm and 2692 mm 25 % less or 672 mm

      Operation

      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 8.2 km/h and 8 km/h 2 % more or 0.2 km/h
      Maximum speed at high range 12.9 km/h and 11 km/h 15 % more or 1.9 km/h

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.

      Load-transfer device

      Tipping load 2721.6 kg and 3201 kg 15 % less or 479.4 kg

      Hydraulic system

      Pump flow rate 83 l/min and 89 l/min 7 % less or 6 l/min

      12 reasons to buy Mustang MTL25:

      Sizes

      Clearance 363 mm and 236 mm 35 % more or 127 mm
      Radius at maximum lifting and unloading 1041 mm and 620 mm 40 % more or 421 mm

      Operation

      Cooling system fluid volume 15.1 l. and 11.4 l. 25 % more or 3.7 l.
      Hydraulic system fluid volume 95 l. and 26.9 l. 72 % more or 68.1 l.
      Engine oil volume 14 l. and 12 l. 14 % more or 2 l.
      Fuel Capacity 108 l. and 88.2 l. 18 % more or 19.8 l.

      Motor

      Full power 72 kW and 67.1 kW 7 % more or 4.9 kW
      Peak torque 395 Nm and 390.5 Nm 1 % more or 4.5 Nm
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Carrier

      Specific ground pressure 29.6 kPa and 34.5 kPa 14 % less or 4.9 kPa
      Rolling bearings number on either side 5 and 3 40 % more or 2
      Caterpillar track width 457 mm and 400 mm 12 % more or 57 mm

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1812 mm and 1844 mm
      Length with bucket 3290 mm and 4026 mm
      Length without bucket 2600 mm and 3099 mm
      Height to cab upper part 2050 mm and 2217 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4048.3 kg and 4850 kg

      Motor

      Manufacturer Case and Yanmar
      Model 445T/M3 and 4TNV106T
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1360.8 kg and 1600 kg

      Carrier

      Caterpillar track length on ground level 1438 mm and 1598 mm

      Images

      Sizes

      1. Length with bucket 3290 mm 1. Length with bucket 4026 mm
      2. Width between caterpillar tracks 1812 mm 2. Width between caterpillar tracks 1844 mm
      3. Height to cab upper part 2050 mm 3. Height to cab upper part 2217 mm
      5. Clearance 236 mm 5. Clearance 363 mm
      6. Length without bucket 2600 mm 6. Length without bucket 3099 mm
      7. Ground clearance at maximum lifting and unloading 2430 mm 7. Ground clearance at maximum lifting and unloading 2375 mm
      8. Radius at maximum lifting and unloading 620 mm 8. Radius at maximum lifting and unloading 1041 mm

      Carrier

      4. Caterpillar track length on ground level 1438 mm 4. Caterpillar track length on ground level 1598 mm