vs.

      Case 440CT vs. Case 420CT serie 3

      12 reasons to buy Case 440CT:

      Sizes

      Clearance 229 mm and 213 mm 7 % more or 16 mm
      Ground clearance at maximum lifting and unloading 2450 mm and 2420 mm 1 % more or 30 mm
      Turning radius with bucket from center 2040 mm and 2050 mm 0 % less or 10 mm

      Operation

      Cooling system fluid volume 17 l. and 11.4 l. 33 % more or 5.6 l.
      Engine oil volume 12 l. and 8.5 l. 29 % more or 3.5 l.

      Motor

      Full power 66 kW and 55.2 kW 16 % more or 10.8 kW
      Effective power 61 kW and 51.5 kW 16 % more or 9.5 kW
      Peak torque 357 Nm and 275.2 Nm 23 % more or 81.8 Nm
      Displacement 4.5 l. and 3.2 l. 29 % more or 1.3 l.

      Hydraulic system

      Pump flow rate 83 l/min and 90 l/min 8 % less or 7 l/min

      Carrier

      Specific ground pressure 34.5 kPa and 40 kPa 14 % less or 5.5 kPa
      Caterpillar track width 400 mm and 320 mm 20 % more or 80 mm

      6 reasons to buy Case 420CT serie 3:

      Sizes

      Radius at maximum lifting and unloading 630 mm and 590 mm 6 % more or 40 mm
      Machine rear swing radius from center 1450 mm and 1480 mm 2 % less or 30 mm

      Operation

      Maximum speed at high range 13.5 km/h and 12.2 km/h 10 % more or 1.3 km/h
      Maximum speed at low range 9.3 km/h and 8.2 km/h 12 % more or 1.1 km/h

      Motor

      Power measured at 2500 rev / min and 2300 rev / min 8 % more or 200 rev

      Load-transfer device

      Tipping load 2592.3 kg and 2721 kg 5 % less or 128.7 kg

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1802 mm and 1651 mm
      Length with bucket 3230 mm and 3290 mm
      Length without bucket 2640 mm and 2600 mm
      Height to cab upper part 1950 mm and 2020 mm

      Operation

      Working weight 4043 kg and 3783 kg
      Fuel Capacity 83.3 l. and 83.3 l.
      Hydraulic system fluid volume 50 l. and 50 l.
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Manufacturer Case and Case
      Cylinders number 4 and 4
      Model Family III 445T/M2 and 432T/M3
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1361 kg and 1297.3 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Carrier

      Rolling bearings number on either side 3 and 3
      Caterpillar track length on ground level 1436 mm and 1438 mm

      Images

      Sizes

      6. Length without bucket 2640 mm 6. Length without bucket 2600 mm
      7. Ground clearance at maximum lifting and unloading 2450 mm 7. Ground clearance at maximum lifting and unloading 2420 mm
      8. Radius at maximum lifting and unloading 590 mm 8. Radius at maximum lifting and unloading 630 mm
      1. Length with bucket 3230 mm 1. Length with bucket 3290 mm
      2. Width between caterpillar tracks 1802 mm 2. Width between caterpillar tracks 1651 mm
      3. Height to cab upper part 1950 mm 3. Height to cab upper part 2020 mm
      5. Clearance 229 mm 5. Clearance 213 mm

      Carrier

      4. Caterpillar track length on ground level 1436 mm 4. Caterpillar track length on ground level 1438 mm