vs.

      Case 440CT vs. Takeuchi TL130

      13 reasons to buy Case 440CT:

      Sizes

      Machine rear swing radius from center 1480 mm and 2082.8 mm 29 % less or 602.8 mm

      Operation

      Fuel Capacity 83.3 l. and 75 l. 10 % more or 8.3 l.
      Cooling system fluid volume 17 l. and 10.9 l. 36 % more or 6.1 l.
      Engine oil volume 12 l. and 10.2 l. 15 % more or 1.8 l.
      Hydraulic system fluid volume 50 l. and 40.1 l. 20 % more or 9.9 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Maximum speed at low range 8.2 km/h and 7.1 km/h 13 % more or 1.1 km/h
      Maximum speed at high range 12.2 km/h and 10.1 km/h 17 % more or 2.1 km/h

      Motor

      Peak torque 357 Nm and 245.4 Nm 31 % more or 111.6 Nm
      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.
      Full power 66 kW and 50 kW 24 % more or 16 kW

      Load-transfer device

      Breakout power 2815 kg and 3051.8 kg 8 % less or 236.8 kg

      Carrier

      Caterpillar track width 400 mm and 38.1 mm 90 % more or 361.9 mm

      10 reasons to buy Takeuchi TL130:

      Sizes

      Clearance 309.9 mm and 229 mm 26 % more or 80.9 mm
      Ground clearance at maximum lifting and unloading 3030.2 mm and 2450 mm 19 % more or 580.2 mm
      Radius at maximum lifting and unloading 731.5 mm and 590 mm 19 % more or 141.5 mm
      Turning radius with bucket from center 1585 mm and 2040 mm 22 % less or 455 mm

      Motor

      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev
      Power measured at 2450 rev / min and 2300 rev / min 6 % more or 150 rev

      Load-transfer device

      Tipping load 2100.1 kg and 2721 kg 23 % less or 620.9 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 83 l/min 18 % less or 14.9 l/min

      Carrier

      Specific ground pressure 33.5 kPa and 34.5 kPa 3 % less or 1.0 kPa
      Rolling bearings number on either side 5 and 3 40 % more or 2

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1802 mm and 1579.9 mm
      Length with bucket 3230 mm and 3431.5 mm
      Height to cab upper part 1950 mm and 2235.2 mm

      Operation

      Working weight 4043 kg and 3400.6 kg
      Operating voltage 12 V and 12 V

      Motor

      Manufacturer Case and Yanmar
      Cylinders number 4 and 4
      Model Family III 445T/M2 and 4TNV98

      Load-transfer device

      Workload 1361 kg and 734.8 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20587.7 kPa

      Carrier

      Caterpillar track length on ground level 1436 mm and 1389.4 mm

      Images

      Sizes

      1. Length with bucket 3230 mm 1. Length with bucket 3431.5 mm
      2. Width between caterpillar tracks 1802 mm 2. Width between caterpillar tracks 1579.9 mm
      3. Height to cab upper part 1950 mm 3. Height to cab upper part 2235.2 mm
      5. Clearance 229 mm 5. Clearance 309.9 mm
      7. Ground clearance at maximum lifting and unloading 2450 mm 7. Ground clearance at maximum lifting and unloading 3030.2 mm
      8. Radius at maximum lifting and unloading 590 mm 8. Radius at maximum lifting and unloading 731.5 mm

      Carrier

      4. Caterpillar track length on ground level 1436 mm 4. Caterpillar track length on ground level 1389.4 mm