vs.

      Case 450CT serie 3 vs. Case 450CT

      12 reasons to buy Case 450CT serie 3:

      Sizes

      Radius at maximum lifting and unloading 760 mm and 678 mm 11 % more or 82 mm
      Machine rear swing radius from center 1520 mm and 1580 mm 4 % less or 60 mm
      Clearance 287 mm and 231 mm 20 % more or 56 mm
      Ground clearance at maximum lifting and unloading 2410 mm and 2400 mm 0 % more or 10 mm

      Operation

      Fuel Capacity 78.4 l. and 78.3 l. 0 % more or 0.1 l.
      Hydraulic system fluid volume 64.4 l. and 64.3 l. 0 % more or 0.1 l.
      Maximum speed at high range 12.9 km/h and 12 km/h 7 % more or 0.9 km/h

      Motor

      Effective power 61.9 kW and 61.2 kW 1 % more or 0.7 kW
      Peak torque 390.5 Nm and 356 Nm 9 % more or 34.5 Nm
      Full power 67.1 kW and 65.7 kW 2 % more or 1.4 kW

      Hydraulic system

      Pump flow rate 83 l/min and 83.9 l/min 1 % less or 0.9 l/min

      Carrier

      Contact with ground area 1.5 m2 and 1.4 m2 7 % more or 0.1 m2

      4 reasons to buy Case 450CT:

      Sizes

      Turning radius with bucket from center 2190 mm and 2340 mm 6 % less or 150 mm

      Operation

      Cooling system fluid volume 17 l. and 11.4 l. 33 % more or 5.6 l.
      Maximum speed at low range 8.5 km/h and 8.2 km/h 4 % more or 0.3 km/h

      Motor

      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 2112 mm and 2098 mm
      Length with bucket 3570 mm and 3590 mm
      Length without bucket 2790 mm and 2770 mm
      Height to cab upper part 2120 mm and 2030 mm

      Operation

      Working weight 4955.5 kg and 4951 kg
      Engine oil volume 12 l. and 12 l.
      Operating voltage 12 V and 12 V
      Generator current strength 95 amperes and 95 amperes

      Motor

      Aspiration turbocharging and turbocharging
      Power measured at 2300 rev / min and 2300 rev / min
      Manufacturer Case and Case
      Displacement 4.5 l. and 4.5 l.
      Model 445T/M3 and Family III 445T/M2, 2 level
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1749.5 kg and 1750 kg
      Tipping load 3499 kg and 3499 kg

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Carrier

      Specific ground pressure 33.1 kPa and 33.1 kPa
      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1638 mm and 1645 mm
      Caterpillar track width 450 mm and 450 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 760 mm 8. Radius at maximum lifting and unloading 678 mm
      1. Length with bucket 3570 mm 1. Length with bucket 3590 mm
      2. Width between caterpillar tracks 2112 mm 2. Width between caterpillar tracks 2098 mm
      3. Height to cab upper part 2120 mm 3. Height to cab upper part 2030 mm
      5. Clearance 287 mm 5. Clearance 231 mm
      6. Length without bucket 2790 mm 6. Length without bucket 2770 mm
      7. Ground clearance at maximum lifting and unloading 2410 mm 7. Ground clearance at maximum lifting and unloading 2400 mm

      Carrier

      4. Caterpillar track length on ground level 1638 mm 4. Caterpillar track length on ground level 1645 mm