- Home/
- Comparison/
- Rough Terrain Truck/
- Case 450CT serie 3 vs. Gehl CTL65
Case 450CT serie 3 vs. Gehl CTL65
14 reasons to buy Case 450CT serie 3:
Sizes
Ground clearance at maximum lifting and unloading | 2410 mm and 2370 mm | 2 % more or 40 mm |
Radius at maximum lifting and unloading | 760 mm and 730 mm | 4 % more or 30 mm |
Machine rear swing radius from center | 1520 mm and 1549 mm | 2 % less or 29 mm |
Turning radius with bucket from center | 2340 mm and 2362 mm | 1 % less or 22 mm |
Operation
Fuel Capacity | 78.4 l. and 75 l. | 4 % more or 3.4 l. |
Engine oil volume | 12 l. and 10.2 l. | 15 % more or 1.8 l. |
Hydraulic system fluid volume | 64.4 l. and 38.6 l. | 40 % more or 25.8 l. |
Generator current strength | 95 amperes and 40 amperes | 58 % more or 55 amperes |
Maximum speed at low range | 8.2 km/h and 7.2 km/h | 12 % more or 1.0 km/h |
Maximum speed at high range | 12.9 km/h and 10.9 km/h | 16 % more or 2.0 km/h |
Motor
Displacement | 4.5 l. and 3.3 l. | 27 % more or 1.2 l. |
Full power | 67.1 kW and 50 kW | 25 % more or 17.1 kW |
Peak torque | 390.5 Nm and 242.7 Nm | 38 % more or 147.8 Nm |
Carrier
Specific ground pressure | 33.1 kPa and 33.5 kPa | 1 % less or 0.4 kPa |
7 reasons to buy Gehl CTL65:
Sizes
Clearance | 310 mm and 287 mm | 7 % more or 23 mm |
Operation
Cooling system fluid volume | 16.5 l. and 11.4 l. | 31 % more or 5.1 l. |
Motor
Power measured at | 2500 rev / min and 2300 rev / min | 8 % more or 200 rev |
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Load-transfer device
Tipping load | 2100 kg and 3499 kg | 40 % less or 1399 kg |
Hydraulic system
Pump flow rate | 69.5 l/min and 83 l/min | 16 % less or 13.5 l/min |
Carrier
Caterpillar track width | 8128 mm and 450 mm | 94 % more or 7678 mm |
Neutral reasons:
Sizes
Width between caterpillar tracks | 2112 mm and 1580 mm |
Length with bucket | 3570 mm and 3543 mm |
Length without bucket | 2790 mm and 2756 mm |
Height to cab upper part | 2120 mm and 2123 mm |
Operation
Working weight | 4955.5 kg and 3635 kg |
Operating voltage | 12 V and 12 V |
Motor
Aspiration | turbocharging and natural aspiration |
Manufacturer | Case and Yanmar |
Model | 445T/M3 and 4TNV98 |
Cylinders number | 4 and 4 |
Load-transfer device
Workload | 1749.5 kg and 1050 kg |
Carrier
Rolling bearings number on either side | 4 and 4 |
Caterpillar track length on ground level | 1638 mm and 423367.2 mm |
Images
Sizes
8. Radius at maximum lifting and unloading | 760 mm | 8. Radius at maximum lifting and unloading | 730 mm |
1. Length with bucket | 3570 mm | 1. Length with bucket | 3543 mm |
2. Width between caterpillar tracks | 2112 mm | 2. Width between caterpillar tracks | 1580 mm |
3. Height to cab upper part | 2120 mm | 3. Height to cab upper part | 2123 mm |
5. Clearance | 287 mm | 5. Clearance | 310 mm |
6. Length without bucket | 2790 mm | 6. Length without bucket | 2756 mm |
7. Ground clearance at maximum lifting and unloading | 2410 mm | 7. Ground clearance at maximum lifting and unloading | 2370 mm |
Carrier
4. Caterpillar track length on ground level | 1638 mm | 4. Caterpillar track length on ground level | 423367.2 mm |