vs.

      Case 450CT serie 3 vs. Terex PT80

      6 reasons to buy Case 450CT serie 3:

      Operation

      Engine oil volume 12 l. and 8.5 l. 29 % more or 3.5 l.
      Generator current strength 95 amperes and 90 amperes 5 % more or 5 amperes
      Fuel Capacity 78.4 l. and 68.1 l. 13 % more or 10.3 l.

      Motor

      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.
      Full power 67.1 kW and 61.9 kW 8 % more or 5.2 kW
      Peak torque 390.5 Nm and 265.1 Nm 32 % more or 125.4 Nm

      12 reasons to buy Terex PT80:

      Sizes

      Clearance 381 mm and 287 mm 25 % more or 94 mm
      Ground clearance at maximum lifting and unloading 2515 mm and 2410 mm 4 % more or 105 mm

      Operation

      Hydraulic system fluid volume 79.5 l. and 64.4 l. 19 % more or 15.1 l.
      Maximum speed at low range 11.3 km/h and 8.2 km/h 27 % more or 3.1 km/h
      Maximum speed at high range 20.1 km/h and 12.9 km/h 36 % more or 7.2 km/h

      Motor

      Power measured at 2800 rev / min and 2300 rev / min 18 % more or 500 rev

      Load-transfer device

      Tipping load 2812.3 kg and 3499 kg 20 % less or 686.7 kg

      Hydraulic system

      Pump flow rate 65.9 l/min and 83 l/min 21 % less or 17.1 l/min

      Carrier

      Caterpillar track width 457 mm and 450 mm 2 % more or 7 mm
      Contact with ground area 1.6 m2 and 1.5 m2 6 % more or 0.1 m2
      Specific ground pressure 24.1 kPa and 33.1 kPa 27 % less or 9.0 kPa
      Rolling bearings number on either side 24 and 4 83 % more or 20

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 2112 mm and 1778 mm
      Length with bucket 3570 mm and 3632 mm
      Length without bucket 2790 mm and 2845 mm
      Height to cab upper part 2120 mm and 2210 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4955.5 kg and 4069.6 kg
      Cooling system fluid volume 11.4 l. and 11.4 l.

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging
      Manufacturer Case and Perkins
      Model 445T/M3 and 804D-33T

      Load-transfer device

      Workload 1749.5 kg and 1406.1 kg

      Carrier

      Caterpillar track length on ground level 1638 mm and 1803 mm

      Images

      Sizes

      1. Length with bucket 3570 mm 1. Length with bucket 3632 mm
      2. Width between caterpillar tracks 2112 mm 2. Width between caterpillar tracks 1778 mm
      3. Height to cab upper part 2120 mm 3. Height to cab upper part 2210 mm
      5. Clearance 287 mm 5. Clearance 381 mm
      6. Length without bucket 2790 mm 6. Length without bucket 2845 mm
      7. Ground clearance at maximum lifting and unloading 2410 mm 7. Ground clearance at maximum lifting and unloading 2515 mm

      Carrier

      4. Caterpillar track length on ground level 1638 mm 4. Caterpillar track length on ground level 1803 mm