- Home/
- Comparison/
- Rough Terrain Truck/
- Case 450CT serie 3 vs. Volvo MCT135C
Case 450CT serie 3 vs. Volvo MCT135C
9 reasons to buy Case 450CT serie 3:
Sizes
Machine rear swing radius from center | 1520 mm and 1760 mm | 14 % less or 240 mm |
Clearance | 287 mm and 248 mm | 14 % more or 39 mm |
Ground clearance at maximum lifting and unloading | 2410 mm and 2390 mm | 1 % more or 20 mm |
Operation
Maximum speed at high range | 12.9 km/h and 12.6 km/h | 2 % more or 0.3 km/h |
Hydraulic system fluid volume | 64.4 l. and 60 l. | 7 % more or 4.4 l. |
Motor
Power measured at | 2300 rev / min and 2200 rev / min | 4 % more or 100 rev |
Displacement | 4.5 l. and 4.4 l. | 2 % more or 0.1 l. |
Load-transfer device
Tipping load | 3499 kg and 3913.6 kg | 11 % less or 414.6 kg |
Hydraulic system
Pump flow rate | 83 l/min and 87 l/min | 5 % less or 4 l/min |
10 reasons to buy Volvo MCT135C:
Sizes
Turning radius with bucket from center | 1760 mm and 2340 mm | 25 % less or 580 mm |
Radius at maximum lifting and unloading | 900 mm and 760 mm | 16 % more or 140 mm |
Operation
Maximum speed at low range | 9.2 km/h and 8.2 km/h | 11 % more or 1.0 km/h |
Fuel Capacity | 103 l. and 78.4 l. | 24 % more or 24.6 l. |
Cooling system fluid volume | 15.5 l. and 11.4 l. | 26 % more or 4.1 l. |
Engine oil volume | 15 l. and 12 l. | 20 % more or 3 l. |
Motor
Effective power | 68.6 kW and 61.9 kW | 10 % more or 6.7 kW |
Peak torque | 408.1 Nm and 390.5 Nm | 4 % more or 17.6 Nm |
Torque measured at | 1800 rev / min and 1300 rev / min | 28 % more or 500 rev |
Full power | 68.6 kW and 67.1 kW | 2 % more or 1.5 kW |
Neutral reasons:
Sizes
Width between caterpillar tracks | 2112 mm and 1980 mm |
Length with bucket | 3570 mm and 3780 mm |
Length without bucket | 2790 mm and 2740 mm |
Height to cab upper part | 2120 mm and 2080 mm |
Operation
Working weight | 4955.5 kg and 4836.7 kg |
Operating voltage | 12 V and 12 V |
Generator current strength | 95 amperes and 95 amperes |
Motor
Aspiration | turbocharging and turbocharging |
Cylinders number | 4 and 4 |
Manufacturer | Case and JCB |
Model | 445T/M3 and TC63 |
Load-transfer device
Workload | 1749.5 kg and 1360.8 kg |
Carrier
Caterpillar track width | 450 mm and 450 mm |
Images
Sizes
1. Length with bucket | 3570 mm | 1. Length with bucket | 3780 mm |
2. Width between caterpillar tracks | 2112 mm | 2. Width between caterpillar tracks | 1980 mm |
3. Height to cab upper part | 2120 mm | 3. Height to cab upper part | 2080 mm |
5. Clearance | 287 mm | 5. Clearance | 248 mm |
6. Length without bucket | 2790 mm | 6. Length without bucket | 2740 mm |
7. Ground clearance at maximum lifting and unloading | 2410 mm | 7. Ground clearance at maximum lifting and unloading | 2390 mm |
8. Radius at maximum lifting and unloading | 760 mm | 8. Radius at maximum lifting and unloading | 900 mm |