vs.

      Case 450CT vs. Gehl CTL60

      15 reasons to buy Case 450CT:

      Sizes

      Ground clearance at maximum lifting and unloading 2400 mm and 2370 mm 1 % more or 30 mm
      Turning radius with bucket from center 2190 mm and 2362 mm 7 % less or 172 mm

      Operation

      Cooling system fluid volume 17 l. and 11 l. 35 % more or 6 l.
      Generator current strength 95 amperes and 40 amperes 58 % more or 55 amperes
      Engine oil volume 12 l. and 10.2 l. 15 % more or 1.8 l.
      Maximum speed at low range 8.5 km/h and 7.2 km/h 15 % more or 1.3 km/h
      Hydraulic system fluid volume 64.3 l. and 38.6 l. 40 % more or 25.7 l.
      Maximum speed at high range 12 km/h and 10.1 km/h 16 % more or 1.9 km/h
      Fuel Capacity 78.3 l. and 75 l. 4 % more or 3.3 l.

      Motor

      Effective power 61.2 kW and 49.2 kW 20 % more or 12.0 kW
      Peak torque 356 Nm and 245.4 Nm 31 % more or 110.6 Nm
      Displacement 4.5 l. and 3.3 l. 27 % more or 1.2 l.

      Load-transfer device

      Breakout power 2812.3 kg and 3051.8 kg 8 % less or 239.5 kg

      Carrier

      Specific ground pressure 33.1 kPa and 33.5 kPa 1 % less or 0.4 kPa
      Caterpillar track width 450 mm and 320 mm 29 % more or 130 mm

      7 reasons to buy Gehl CTL60:

      Sizes

      Clearance 310 mm and 231 mm 25 % more or 79 mm
      Radius at maximum lifting and unloading 851 mm and 678 mm 20 % more or 173 mm
      Machine rear swing radius from center 1549 mm and 1580 mm 2 % less or 31 mm

      Motor

      Power measured at 2450 rev / min and 2300 rev / min 6 % more or 150 rev
      Torque measured at 1600 rev / min and 1400 rev / min 12 % more or 200 rev

      Load-transfer device

      Tipping load 2100.1 kg and 3499 kg 40 % less or 1398.9 kg

      Hydraulic system

      Pump flow rate 68.1 l/min and 83.9 l/min 19 % less or 15.8 l/min

      Neutral reasons:

      Sizes

      Height to cab upper part 2030 mm and 2123 mm
      Width between caterpillar tracks 2098 mm and 1580 mm
      Length with bucket 3590 mm and 3543 mm
      Length without bucket 2770 mm and 2756 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4951 kg and 3400.6 kg

      Motor

      Model Family III 445T/M2, 2 level and 4TNV98
      Manufacturer Case and Yanmar
      Cylinders number 4 and 4
      Aspiration turbocharging and natural aspiration

      Load-transfer device

      Workload 1750 kg and 1050.1 kg

      Hydraulic system

      Overflow valve pressure 20684.3 kPa and 20601.5 kPa

      Carrier

      Rolling bearings number on either side 4 and 4
      Caterpillar track length on ground level 1645 mm and 1389 mm

      Images

      Sizes

      1. Length with bucket 3590 mm 1. Length with bucket 3543 mm
      2. Width between caterpillar tracks 2098 mm 2. Width between caterpillar tracks 1580 mm
      3. Height to cab upper part 2030 mm 3. Height to cab upper part 2123 mm
      5. Clearance 231 mm 5. Clearance 310 mm
      6. Length without bucket 2770 mm 6. Length without bucket 2756 mm
      7. Ground clearance at maximum lifting and unloading 2400 mm 7. Ground clearance at maximum lifting and unloading 2370 mm
      8. Radius at maximum lifting and unloading 678 mm 8. Radius at maximum lifting and unloading 851 mm

      Carrier

      4. Caterpillar track length on ground level 1645 mm 4. Caterpillar track length on ground level 1389 mm