vs.

      Mustang MTL25 vs. Case 440CT

      10 reasons to buy Mustang MTL25:

      Sizes

      Clearance 363 mm and 229 mm 37 % more or 134 mm
      Radius at maximum lifting and unloading 1041 mm and 590 mm 43 % more or 451 mm

      Operation

      Fuel Capacity 108 l. and 83.3 l. 23 % more or 24.7 l.
      Engine oil volume 14 l. and 12 l. 14 % more or 2 l.
      Hydraulic system fluid volume 95 l. and 50 l. 47 % more or 45 l.

      Motor

      Full power 72 kW and 66 kW 8 % more or 6 kW
      Peak torque 395 Nm and 357 Nm 10 % more or 38 Nm

      Carrier

      Specific ground pressure 29.6 kPa and 34.5 kPa 14 % less or 4.9 kPa
      Rolling bearings number on either side 5 and 3 40 % more or 2
      Caterpillar track width 457 mm and 400 mm 12 % more or 57 mm

      12 reasons to buy Case 440CT:

      Sizes

      Ground clearance at maximum lifting and unloading 2450 mm and 2375 mm 3 % more or 75 mm
      Machine rear swing radius from center 1480 mm and 1816 mm 19 % less or 336 mm
      Turning radius with bucket from center 2040 mm and 2692 mm 24 % less or 652 mm

      Operation

      Generator current strength 95 amperes and 60 amperes 37 % more or 35 amperes
      Maximum speed at low range 8.2 km/h and 8 km/h 2 % more or 0.2 km/h
      Maximum speed at high range 12.2 km/h and 11 km/h 10 % more or 1.2 km/h
      Cooling system fluid volume 17 l. and 15.1 l. 11 % more or 1.9 l.

      Motor

      Power measured at 2300 rev / min and 2200 rev / min 4 % more or 100 rev
      Displacement 4.5 l. and 4.4 l. 2 % more or 0.1 l.

      Load-transfer device

      Tipping load 2721 kg and 3201 kg 15 % less or 480 kg
      Breakout power 2815 kg and 3942.6 kg 29 % less or 1127.6 kg

      Hydraulic system

      Pump flow rate 83 l/min and 89 l/min 7 % less or 6 l/min

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1844 mm and 1802 mm
      Length with bucket 4026 mm and 3230 mm
      Length without bucket 3099 mm and 2640 mm
      Height to cab upper part 2217 mm and 1950 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4850 kg and 4043 kg

      Motor

      Manufacturer Yanmar and Case
      Model 4TNV106T and Family III 445T/M2
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1600 kg and 1361 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20684.3 kPa

      Carrier

      Caterpillar track length on ground level 1598 mm and 1436 mm
      Track width 1387 mm and 1400 mm

      Images

      Sizes

      1. Length with bucket 4026 mm 1. Length with bucket 3230 mm
      2. Width between caterpillar tracks 1844 mm 2. Width between caterpillar tracks 1802 mm
      3. Height to cab upper part 2217 mm 3. Height to cab upper part 1950 mm
      5. Clearance 363 mm 5. Clearance 229 mm
      6. Length without bucket 3099 mm 6. Length without bucket 2640 mm
      7. Ground clearance at maximum lifting and unloading 2375 mm 7. Ground clearance at maximum lifting and unloading 2450 mm
      8. Radius at maximum lifting and unloading 1041 mm 8. Radius at maximum lifting and unloading 590 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1436 mm
      9. Track width 1387 mm 9. Track width 1400 mm