vs.

      Mustang MTL25 vs. Gehl CTL80

      4 reasons to buy Mustang MTL25:

      Operation

      Generator current strength 60 amperes and 50 amperes 17 % more or 10 amperes
      Hydraulic system fluid volume 95 l. and 64 l. 33 % more or 31 l.
      Fuel Capacity 108 l. and 107.9 l. 0 % more or 0.1 l.

      Motor

      Peak torque 395 Nm and 259 Nm 34 % more or 136 Nm

      3 reasons to buy Gehl CTL80:

      Sizes

      Radius at maximum lifting and unloading 1049 mm and 1041 mm 1 % more or 8 mm

      Load-transfer device

      Tipping load 3200.5 kg and 3201 kg 0 % less or 0.5 kg

      Hydraulic system

      Pump flow rate 88.6 l/min and 89 l/min 0 % less or 0.4 l/min

      Neutral reasons:

      Sizes

      Clearance 363 mm and 363 mm
      Ground clearance at maximum lifting and unloading 2375 mm and 2375 mm
      Width between caterpillar tracks 1844 mm and 1884 mm
      Length with bucket 4026 mm and 4026 mm
      Machine rear swing radius from center 1816 mm and 1816 mm
      Length without bucket 3099 mm and 3106 mm
      Turning radius with bucket from center 2692 mm and 2692 mm
      Height to cab upper part 2217 mm and 2217 mm

      Operation

      Engine oil volume 14 l. and 14 l.
      Maximum speed at low range 8 km/h and 8 km/h
      Operating voltage 12 V and 12 V
      Maximum speed at high range 11 km/h and 11 km/h
      Working weight 4850 kg and 4849.8 kg
      Cooling system fluid volume 15.1 l. and 15.1 l.

      Motor

      Manufacturer Yanmar and Yanmar
      Model 4TNV106T and 4TNV106T
      Power measured at 2200 rev / min and 2200 rev / min
      Torque measured at 1400 rev / min and 1400 rev / min
      Displacement 4.4 l. and 4.4 l.
      Cylinders number 4 and 4
      Aspiration turbocharging and turbocharging

      Load-transfer device

      Workload 1600 kg and 1600.3 kg
      Breakout power 3942.6 kg and 3942.6 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20601.5 kPa

      Carrier

      Specific ground pressure 29.6 kPa and 29.6 kPa
      Rolling bearings number on either side 5 and 5
      Caterpillar track length on ground level 1598 mm and 1598 mm
      Caterpillar track width 457 mm and 457 mm

      Images

      Sizes

      1. Length with bucket 4026 mm 1. Length with bucket 4026 mm
      2. Width between caterpillar tracks 1844 mm 2. Width between caterpillar tracks 1884 mm
      3. Height to cab upper part 2217 mm 3. Height to cab upper part 2217 mm
      5. Clearance 363 mm 5. Clearance 363 mm
      6. Length without bucket 3099 mm 6. Length without bucket 3106 mm
      7. Ground clearance at maximum lifting and unloading 2375 mm 7. Ground clearance at maximum lifting and unloading 2375 mm
      8. Radius at maximum lifting and unloading 1041 mm 8. Radius at maximum lifting and unloading 1049 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1598 mm