vs.

      Mustang MTL25 vs. Takeuchi TL140

      11 reasons to buy Mustang MTL25:

      Sizes

      Clearance 363 mm and 325.1 mm 10 % more or 37.9 mm
      Radius at maximum lifting and unloading 1041 mm and 873.8 mm 16 % more or 167.2 mm

      Operation

      Generator current strength 60 amperes and 50 amperes 17 % more or 10 amperes
      Maximum speed at low range 8 km/h and 7.4 km/h 7 % more or 0.6 km/h
      Maximum speed at high range 11 km/h and 10.6 km/h 4 % more or 0.4 km/h
      Fuel Capacity 108 l. and 90.1 l. 17 % more or 17.9 l.
      Engine oil volume 14 l. and 9.6 l. 31 % more or 4.4 l.
      Hydraulic system fluid volume 95 l. and 51.9 l. 45 % more or 43.1 l.

      Motor

      Peak torque 395 Nm and 261.7 Nm 34 % more or 133.3 Nm
      Displacement 4.4 l. and 3.1 l. 30 % more or 1.3 l.
      Full power 72 kW and 60.4 kW 16 % more or 11.6 kW

      10 reasons to buy Takeuchi TL140:

      Sizes

      Ground clearance at maximum lifting and unloading 3121.7 mm and 2375 mm 24 % more or 746.7 mm
      Machine rear swing radius from center 1666.2 mm and 1816 mm 8 % less or 149.8 mm
      Turning radius with bucket from center 2293.6 mm and 2692 mm 15 % less or 398.4 mm

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev
      Torque measured at 1800 rev / min and 1400 rev / min 22 % more or 400 rev

      Load-transfer device

      Tipping load 2699.8 kg and 3201 kg 16 % less or 501.2 kg
      Breakout power 3357.9 kg and 3942.6 kg 15 % less or 584.7 kg

      Hydraulic system

      Pump flow rate 75 l/min and 89 l/min 16 % less or 14 l/min

      Carrier

      Caterpillar track width 457.2 mm and 457 mm 0 % more or 0.2 mm
      Specific ground pressure 28.3 kPa and 29.6 kPa 4 % less or 1.3 kPa

      Neutral reasons:

      Sizes

      Width between caterpillar tracks 1844 mm and 1770.4 mm
      Length with bucket 4026 mm and 3708.4 mm
      Height to cab upper part 2217 mm and 2270.8 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 4850 kg and 4350 kg
      Cooling system fluid volume 15.1 l. and 15.1 l.

      Motor

      Manufacturer Yanmar and Isuzu
      Model 4TNV106T and 4JG1T
      Cylinders number 4 and 4

      Load-transfer device

      Workload 1600 kg and 944.8 kg

      Hydraulic system

      Overflow valve pressure 20600 kPa and 20601.5 kPa

      Carrier

      Rolling bearings number on either side 5 and 5
      Caterpillar track length on ground level 1598 mm and 1496 mm

      Images

      Sizes

      8. Radius at maximum lifting and unloading 1041 mm 8. Radius at maximum lifting and unloading 873.8 mm
      1. Length with bucket 4026 mm 1. Length with bucket 3708.4 mm
      2. Width between caterpillar tracks 1844 mm 2. Width between caterpillar tracks 1770.4 mm
      3. Height to cab upper part 2217 mm 3. Height to cab upper part 2270.8 mm
      5. Clearance 363 mm 5. Clearance 325.1 mm
      7. Ground clearance at maximum lifting and unloading 2375 mm 7. Ground clearance at maximum lifting and unloading 3121.7 mm

      Carrier

      4. Caterpillar track length on ground level 1598 mm 4. Caterpillar track length on ground level 1496 mm