- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L542 2 plus 1 vs. Daewoo MEGA160
Liebherr L542 2 plus 1 vs. Daewoo MEGA160
13 reasons to buy Liebherr L542 2 plus 1:
Sizes
Clearance | 490 mm and 450 mm | 8 % more or 40 mm |
Shovel
Unloading ground clearance at maximum lifting | 2845 mm and 2745 mm | 4 % more or 100 mm |
Bucket capacity with top | 2.7 m3 and 1.6 m3 | 41 % more or 1.1 m3 |
Operation
Hydraulic system fluid volume | 180 l. and 100 l. | 44 % more or 80 l. |
Engine oil volume | 29 l. and 13 l. | 55 % more or 16 l. |
Static tipping weight | 11040 kg and 6500 kg | 41 % more or 4540 kg |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Full power | 105 kW and 81 kW | 23 % more or 24 kW |
Displacement | 6.4 l. and 5.8 l. | 9 % more or 0.6 l. |
Maximum torque | 770 Nm and 363.4 Nm | 53 % more or 406.6 Nm |
Hydraulic system
Lifting time | 5.9 sec and 6 sec | 2 % less or 0.1 sec |
Gear box
Maximum forward speed | 40 km/h and 34.5 km/h | 14 % more or 5.5 km/h |
Maximum reverse gear | 40 km/h and 22.4 km/h | 44 % more or 17.6 km/h |
9 reasons to buy Daewoo MEGA160:
Operation
Front axle / differential fluid volume | 18 l. and 16.3 l. | 9 % more or 1.7 l. |
Rear axle / differential fluid volume | 18 l. and 15 l. | 17 % more or 3 l. |
Fuel Capacity | 185 l. and 170 l. | 8 % more or 15 l. |
Motor
Power measured at | 2200 rev / min and 2000 rev / min | 9 % more or 200 rev |
Cylinders number | 6 and 4 | 33 % more or 2 |
Hydraulic system
Pump bandwidth | 140.1 l/min and 140 l/min | 0 % more or 0.1 l/min |
Unloading time | 1.5 sec and 1.6 sec | 6 % less or 0.1 sec |
Lowering time | 3.1 sec and 4 sec | 22 % less or 0.9 sec |
Gear box
Forward gears number | 4 and 3 | 25 % more or 1 |
Neutral reasons:
Sizes
Hinge axis maximum height | 3930 mm and 3610 mm |
Length with bucket on ground level | 7225 mm and 6390 mm |
Height to cab upper part | 3250 mm and 3180 mm |
Wheelbase | 2975 mm and 2700 mm |
Shovel
Shovel width | 2500 mm and 2450 mm |
Operation
Operating voltage | 24 V and 24 V |
Rear axle oscillating | 12 degrees and 22 degrees |
Tyre size | 20.5R25 and 17.5-25-12PR |
Working weight | 13040.8 kg and 8600 kg |
Motor
Manufacturer | Liebherr and Daewoo |
Model | D 934 S AG and DB58 |
Aspiration | turbocharging and natural aspiration |
Hydraulic system
Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump |
Overflow valve pressure | 33000 kPa and 19615.6 kPa |
Gear box
Transmission type | hydrostatic and fully automatic powershift |
Reverse gears number | 3 and 3 |
Images
Sizes
1. Length with bucket on ground level | 7225 mm | 1. Length with bucket on ground level | 6390 mm |
3. Height to cab upper part | 3250 mm | 3. Height to cab upper part | 3180 mm |
4. Wheelbase | 2975 mm | 4. Wheelbase | 2700 mm |
5. Clearance | 490 mm | 5. Clearance | 450 mm |
6. Hinge axis maximum height | 3930 mm | 6. Hinge axis maximum height | 3610 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2845 mm | 7. Unloading ground clearance at maximum lifting | 2745 mm |