vs.

      Liebherr L542 2 plus 1 vs. John Deere 724K High-Lift

      7 reasons to buy Liebherr L542 2 plus 1:

      Sizes

      Clearance 490 mm and 400 mm 18 % more or 90 mm

      Shovel

      Breakout power 105 kN and 136.2 kN 23 % less or 31.2 kN

      Operation

      Hydraulic system fluid volume 180 l. and 110 l. 39 % more or 70 l.
      Engine oil volume 29 l. and 28 l. 3 % more or 1 l.

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Gear box

      Maximum forward speed 40 km/h and 35.6 km/h 11 % more or 4.4 km/h
      Maximum reverse gear 40 km/h and 24.2 km/h 39 % more or 15.8 km/h

      14 reasons to buy John Deere 724K High-Lift:

      Shovel

      Unloading ground clearance at maximum lifting 3330 mm and 2845 mm 15 % more or 485 mm
      Bucket capacity with top 3.2 m3 and 2.7 m3 16 % more or 0.5 m3

      Operation

      Fuel Capacity 352 l. and 170 l. 52 % more or 182 l.
      Front axle / differential fluid volume 22 l. and 16.3 l. 26 % more or 5.7 l.
      Rear axle / differential fluid volume 22 l. and 15 l. 32 % more or 7 l.
      Static tipping weight 13376 kg and 11040 kg 17 % more or 2336 kg

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 1155.2 Nm and 770 Nm 33 % more or 385.2 Nm
      Displacement 9 l. and 6.4 l. 29 % more or 2.6 l.

      Hydraulic system

      Pump bandwidth 310 l/min and 140 l/min 55 % more or 170 l/min
      Lifting time 5.5 sec and 5.9 sec 7 % less or 0.4 sec
      Unloading time 1.4 sec and 1.6 sec 12 % less or 0.2 sec
      Lowering time 3 sec and 4 sec 25 % less or 1 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Hinge axis maximum height 3930 mm and 4460 mm
      Length with bucket on ground level 7225 mm and 8710 mm
      Height to cab upper part 3250 mm and 3380 mm
      Wheelbase 2975 mm and 3260 mm

      Shovel

      Shovel width 2500 mm and 3040 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 12 degrees and 26 degrees
      Generator current strength 80 amperes and 80 amperes
      Tyre size 20.5R25 and 23.5 R25
      Working weight 13040.8 kg and 19270 kg

      Motor

      Manufacturer Liebherr and John Deere
      Model D 934 S AG and 6090H, III Level III certified
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow
      Torque measured at 1300 rev / min and 1300 rev / min

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and variable displacement axial piston pump
      Overflow valve pressure 33000 kPa and 25165.8 kPa

      Gear box

      Transmission type hydrostatic and Powershift transmission of intermediate type
      Reverse gears number 3 and 3

      Images

      Sizes

      5. Clearance 490 mm 5. Clearance 400 mm
      6. Hinge axis maximum height 3930 mm 6. Hinge axis maximum height 4460 mm
      1. Length with bucket on ground level 7225 mm 1. Length with bucket on ground level 8710 mm
      3. Height to cab upper part 3250 mm 3. Height to cab upper part 3380 mm
      4. Wheelbase 2975 mm 4. Wheelbase 3260 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2845 mm 7. Unloading ground clearance at maximum lifting 3330 mm