- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L542 2 plus 1 vs. Komatsu WA800-3 Level 2
Liebherr L542 2 plus 1 vs. Komatsu WA800-3 Level 2
6 reasons to buy Liebherr L542 2 plus 1:
Shovel
Breakout power | 105 kN and 676.7 kN | 84 % less or 571.7 kN |
Hydraulic system
Unloading time | 1.6 sec and 2 sec | 20 % less or 0.4 sec |
Lowering time | 4 sec and 4.8 sec | 17 % less or 0.8 sec |
Lifting time | 5.9 sec and 11.2 sec | 47 % less or 5.3 sec |
Gear box
Maximum forward speed | 40 km/h and 28 km/h | 30 % more or 12 km/h |
Maximum reverse gear | 40 km/h and 28.3 km/h | 29 % more or 11.7 km/h |
14 reasons to buy Komatsu WA800-3 Level 2:
Sizes
Clearance | 550 mm and 490 mm | 11 % more or 60 mm |
Shovel
Bucket capacity with top | 11 m3 and 2.7 m3 | 75 % more or 8.3 m3 |
Unloading ground clearance at maximum lifting | 4630 mm and 2845 mm | 39 % more or 1785 mm |
Operation
Rear axle / differential fluid volume | 360 l. and 15 l. | 96 % more or 345 l. |
Static tipping weight | 61089.8 kg and 11040 kg | 82 % more or 50049.8 kg |
Generator current strength | 90 amperes and 80 amperes | 11 % more or 10 amperes |
Fuel Capacity | 1555 l. and 170 l. | 89 % more or 1385 l. |
Hydraulic system fluid volume | 724.9 l. and 180 l. | 75 % more or 544.9 l. |
Engine oil volume | 129.8 l. and 29 l. | 78 % more or 100.8 l. |
Front axle / differential fluid volume | 360 l. and 16.3 l. | 95 % more or 343.7 l. |
Motor
Full power | 636.1 kW and 105 kW | 83 % more or 531.1 kW |
Displacement | 30.5 l. and 6.4 l. | 79 % more or 24.1 l. |
Cylinders number | 12 and 4 | 67 % more or 8 |
Hydraulic system
Pump bandwidth | 405 l/min and 140 l/min | 65 % more or 265 l/min |
Neutral reasons:
Sizes
Length with bucket on ground level | 7225 mm and 13960 mm |
Height to cab upper part | 3250 mm and 5275 mm |
Wheelbase | 2975 mm and 5450 mm |
Hinge axis maximum height | 3930 mm and 6785 mm |
Shovel
Shovel width | 2500 mm and 4810 mm |
Operation
Rear axle oscillating | 12 degrees and 22 degrees |
Tyre size | 20.5R25 and 45/65-45-45 |
Operating voltage | 24 V and 24 V |
Working weight | 13040.8 kg and 101899.5 kg |
Motor
Manufacturer | Liebherr and Komatsu |
Power measured at | 2000 rev / min and 2000 rev / min |
Model | D 934 S AG and SAA12V140E-3 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Hydraulic system
Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and piston pump |
Overflow valve pressure | 33000 kPa and 31371.1 kPa |
Gear box
Transmission type | hydrostatic and Powershift transmission of intermediate type |
Forward gears number | 3 and 3 |
Reverse gears number | 3 and 3 |
Images
Sizes
3. Height to cab upper part | 3250 mm | 3. Height to cab upper part | 5275 mm |
4. Wheelbase | 2975 mm | 4. Wheelbase | 5450 mm |
5. Clearance | 490 mm | 5. Clearance | 550 mm |
6. Hinge axis maximum height | 3930 mm | 6. Hinge axis maximum height | 6785 mm |
1. Length with bucket on ground level | 7225 mm | 1. Length with bucket on ground level | 13960 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2845 mm | 7. Unloading ground clearance at maximum lifting | 4630 mm |