vs.

      Liebherr L542 2 plus 1 vs. Zettelmeyer ZL302

      19 reasons to buy Liebherr L542 2 plus 1:

      Sizes

      Clearance 490 mm and 230 mm 53 % more or 260 mm

      Shovel

      Unloading ground clearance at maximum lifting 2845 mm and 2010 mm 29 % more or 835 mm

      Operation

      Generator current strength 80 amperes and 65 amperes 19 % more or 15 amperes
      Fuel Capacity 170 l. and 38 l. 78 % more or 132 l.
      Hydraulic system fluid volume 180 l. and 28 l. 84 % more or 152 l.
      Engine oil volume 29 l. and 4.3 l. 85 % more or 24.7 l.
      Front axle / differential fluid volume 16.3 l. and 5 l. 69 % more or 11.3 l.
      Rear axle / differential fluid volume 15 l. and 6 l. 60 % more or 9 l.
      Static tipping weight 11040 kg and 1300 kg 88 % more or 9740 kg

      Motor

      Full power 105 kW and 22 kW 79 % more or 83 kW
      Maximum torque 770 Nm and 76 Nm 90 % more or 694 Nm
      Displacement 6.4 l. and 1.2 l. 81 % more or 5.2 l.

      Hydraulic system

      Pump bandwidth 140 l/min and 21 l/min 85 % more or 119 l/min
      Lifting time 5.9 sec and 6 sec 2 % less or 0.1 sec
      Unloading time 1.6 sec and 2.5 sec 36 % less or 0.9 sec

      Gear box

      Forward gears number 3 and 1 67 % more or 2
      Reverse gears number 3 and 1 67 % more or 2
      Maximum forward speed 40 km/h and 20 km/h 50 % more or 20 km/h
      Maximum reverse gear 40 km/h and 20 km/h 50 % more or 20 km/h

      4 reasons to buy Zettelmeyer ZL302:

      Shovel

      Breakout power 19.5 kN and 105 kN 81 % less or 85.5 kN

      Motor

      Torque measured at 1850 rev / min and 1300 rev / min 30 % more or 550 rev
      Power measured at 3000 rev / min and 2000 rev / min 33 % more or 1000 rev

      Hydraulic system

      Lowering time 3 sec and 4 sec 25 % less or 1 sec

      Neutral reasons:

      Sizes

      Wheelbase 2975 mm and 1500 mm
      Length with bucket on ground level 7225 mm and 3940 mm
      Hinge axis maximum height 3930 mm and 2540 mm
      Height to cab upper part 3250 mm and 2310 mm

      Shovel

      Shovel width 2500 mm and 1350 mm

      Operation

      Rear axle oscillating 12 degrees and 20 degrees
      Tyre size 20.5R25 and 10.0/75-15.3
      Working weight 13040.8 kg and 1900 kg
      Operating voltage 24 V and 12 V

      Motor

      Cylinders number 4 and 4
      Aspiration turbocharging and indirect injection
      Model D 934 S AG and KHD F4 M 1008

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump
      Overflow valve pressure 33000 kPa and 19994.8 kPa

      Gear box

      Transmission type hydrostatic and hydrostatic powershift transmission

      Images

      Sizes

      3. Height to cab upper part 3250 mm 3. Height to cab upper part 2310 mm
      4. Wheelbase 2975 mm 4. Wheelbase 1500 mm
      5. Clearance 490 mm 5. Clearance 230 mm
      6. Hinge axis maximum height 3930 mm 6. Hinge axis maximum height 2540 mm
      1. Length with bucket on ground level 7225 mm 1. Length with bucket on ground level 3940 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2845 mm 7. Unloading ground clearance at maximum lifting 2010 mm