vs.

      Liebherr L580 2 plus 2 vs. Hyundai HL780-9

      6 reasons to buy Liebherr L580 2 plus 2:

      Sizes

      Clearance 550 mm and 495 mm 10 % more or 55 mm

      Operation

      Hydraulic system fluid volume 240 l. and 234 l. 2 % more or 6 l.

      Hydraulic system

      Lifting time 5.5 sec and 6.1 sec 10 % less or 0.6 sec
      Lowering time 3.5 sec and 4.1 sec 15 % less or 0.6 sec

      Gear box

      Maximum forward speed 40 km/h and 36.5 km/h 9 % more or 3.5 km/h
      Maximum reverse gear 40 km/h and 25 km/h 37 % more or 15 km/h

      13 reasons to buy Hyundai HL780-9:

      Sizes

      Radius at maximum lifting and unloading 1430 mm and 1150 mm 20 % more or 280 mm

      Shovel

      Bucket capacity with top 5.4 m3 and 5 m3 7 % more or 0.4 m3

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Engine oil volume 38 l. and 23.5 l. 38 % more or 14.5 l.
      Rear axle / differential fluid volume 58 l. and 50 l. 14 % more or 8 l.
      Static tipping weight 24200 kg and 20260 kg 16 % more or 3940 kg
      Fuel Capacity 450 l. and 330 l. 27 % more or 120 l.

      Motor

      Full power 259.5 kW and 197.6 kW 24 % more or 61.9 kW
      Torque measured at 1400 rev / min and 1200 rev / min 14 % more or 200 rev
      Maximum torque 1674.4 Nm and 1285 Nm 23 % more or 389.4 Nm

      Hydraulic system

      Pump bandwidth 420 l/min and 290 l/min 31 % more or 130 l/min
      Unloading time 1.4 sec and 2 sec 30 % less or 0.6 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Length with bucket on ground level 9000 mm and 9630 mm
      Height to cab upper part 3540 mm and 3865 mm
      Wheelbase 3570 mm and 3700 mm
      Hinge axis maximum height 4560 mm and 4560 mm

      Shovel

      Shovel width 3300 mm and 3450 mm
      Unloading ground clearance at maximum lifting 3300 mm and 3300 mm

      Operation

      Rear axle oscillating 26 degrees and 26 degrees
      Tyre size 26.5R25 and 29.5-25
      Front axle / differential fluid volume 58 l. and 58 l.
      Operating voltage 24 V and 24 V
      Working weight 24740 kg and 30000 kg

      Motor

      Model D 926 TI-E A2 and QSM11
      Power measured at 2000 rev / min and 2000 rev / min
      Manufacturer Liebherr and Cummins
      Cylinders number 6 and 6
      Aspiration Turbocharging with intercooler and turbocharging

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and alternating Axial-piston pump

      Gear box

      Transmission type hydrostatic 2+2 and powershift transmission
      Reverse gears number 3 and 3

      Images

      Sizes

      4. Wheelbase 3570 mm 4. Wheelbase 3700 mm
      5. Clearance 550 mm 5. Clearance 495 mm
      6. Hinge axis maximum height 4560 mm 6. Hinge axis maximum height 4560 mm
      8. Radius at maximum lifting and unloading 1150 mm 8. Radius at maximum lifting and unloading 1430 mm
      1. Length with bucket on ground level 9000 mm 1. Length with bucket on ground level 9630 mm
      3. Height to cab upper part 3540 mm 3. Height to cab upper part 3865 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3300 mm 7. Unloading ground clearance at maximum lifting 3300 mm