vs.

      Liebherr L580 2 plus 2 vs. JCB 456HT High-Lift

      14 reasons to buy Liebherr L580 2 plus 2:

      Sizes

      Clearance 550 mm and 470 mm 15 % more or 80 mm

      Shovel

      Bucket capacity with top 5 m3 and 3.7 m3 26 % more or 1.3 m3

      Operation

      Fuel Capacity 330 l. and 318 l. 4 % more or 12 l.
      Hydraulic system fluid volume 240 l. and 215.8 l. 10 % more or 24.2 l.
      Engine oil volume 23.5 l. and 18.9 l. 20 % more or 4.6 l.
      Rear axle / differential fluid volume 50 l. and 49.2 l. 2 % more or 0.8 l.
      Static tipping weight 20260 kg and 9690.1 kg 52 % more or 10569.9 kg

      Motor

      Full power 197.6 kW and 154.4 kW 22 % more or 43.2 kW
      Maximum torque 1285 Nm and 915.2 Nm 29 % more or 369.8 Nm

      Hydraulic system

      Pump bandwidth 290 l/min and 162.8 l/min 44 % more or 127.2 l/min
      Lifting time 5.5 sec and 5.8 sec 5 % less or 0.3 sec
      Lowering time 3.5 sec and 4.1 sec 15 % less or 0.6 sec

      Gear box

      Maximum forward speed 40 km/h and 37.7 km/h 6 % more or 2.3 km/h
      Maximum reverse gear 40 km/h and 24.6 km/h 38 % more or 15.4 km/h

      7 reasons to buy JCB 456HT High-Lift:

      Sizes

      Radius at maximum lifting and unloading 1333 mm and 1150 mm 14 % more or 183 mm

      Shovel

      Unloading ground clearance at maximum lifting 3979 mm and 3300 mm 17 % more or 679 mm

      Operation

      Front axle / differential fluid volume 68.1 l. and 58 l. 15 % more or 10.1 l.
      Turn radius 3182 mm and 7250 mm 56 % less or 4068 mm
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Hydraulic system

      Unloading time 1.2 sec and 2 sec 40 % less or 0.8 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Length with bucket on ground level 9000 mm and 9450 mm
      Height to cab upper part 3540 mm and 3370 mm
      Wheelbase 3570 mm and 2100 mm
      Hinge axis maximum height 4560 mm and 4994 mm

      Shovel

      Shovel width 3300 mm and 2837 mm

      Operation

      Rear axle oscillating 26 degrees and 25 degrees
      Tyre size 26.5R25 and 23.5R25 XHA (L3)
      Working weight 24740 kg and 21335.2 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Model D 926 TI-E A2 and QSC 8.3

      Hydraulic system

      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and twin variable displacement piston pumps
      Overflow valve pressure 35000 kPa and 24993.5 kPa

      Gear box

      Transmission type hydrostatic 2+2 and smooth power shifting
      Reverse gears number 3 and 3

      Images

      Sizes

      4. Wheelbase 3570 mm 4. Wheelbase 2100 mm
      5. Clearance 550 mm 5. Clearance 470 mm
      6. Hinge axis maximum height 4560 mm 6. Hinge axis maximum height 4994 mm
      8. Radius at maximum lifting and unloading 1150 mm 8. Radius at maximum lifting and unloading 1333 mm
      1. Length with bucket on ground level 9000 mm 1. Length with bucket on ground level 9450 mm
      3. Height to cab upper part 3540 mm 3. Height to cab upper part 3370 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3300 mm 7. Unloading ground clearance at maximum lifting 3979 mm