- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L580 2 plus 2 vs. LeTourneau L1850
Liebherr L580 2 plus 2 vs. LeTourneau L1850
8 reasons to buy Liebherr L580 2 plus 2:
Shovel
Breakout power | 175 kN and 1228.5 kN | 86 % less or 1053.5 kN |
Operation
Turn radius | 7250 mm and 13110 mm | 45 % less or 5860 mm |
Motor
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Hydraulic system
Lifting time | 5.5 sec and 14 sec | 61 % less or 8.5 sec |
Unloading time | 2 sec and 4 sec | 50 % less or 2 sec |
Lowering time | 3.5 sec and 6 sec | 42 % less or 2.5 sec |
Gear box
Maximum forward speed | 40 km/h and 16.9 km/h | 58 % more or 23.1 km/h |
Maximum reverse gear | 40 km/h and 16.9 km/h | 58 % more or 23.1 km/h |
13 reasons to buy LeTourneau L1850:
Sizes
Clearance | 760 mm and 550 mm | 28 % more or 210 mm |
Radius at maximum lifting and unloading | 2940 mm and 1150 mm | 61 % more or 1790 mm |
Shovel
Unloading ground clearance at maximum lifting | 6810 mm and 3300 mm | 52 % more or 3510 mm |
Bucket capacity with top | 25.2 m3 and 5 m3 | 80 % more or 20.2 m3 |
Operation
Fuel Capacity | 3975 l. and 330 l. | 92 % more or 3645 l. |
Hydraulic system fluid volume | 1419 l. and 240 l. | 83 % more or 1179 l. |
Engine oil volume | 204 l. and 23.5 l. | 88 % more or 180.5 l. |
Front axle / differential fluid volume | 95 l. and 58 l. | 39 % more or 37 l. |
Rear axle / differential fluid volume | 95 l. and 50 l. | 47 % more or 45 l. |
Static tipping weight | 102060 kg and 20260 kg | 80 % more or 81800 kg |
Motor
Cylinders number | 16 and 6 | 62 % more or 10 |
Full power | 1491.4 kW and 197.6 kW | 87 % more or 1293.8 kW |
Hydraulic system
Pump bandwidth | 1892.7 l/min and 290 l/min | 85 % more or 1602.7 l/min |
Neutral reasons:
Sizes
Length with bucket on ground level | 9000 mm and 17830 mm |
Wheelbase | 3570 mm and 7010 mm |
Hinge axis maximum height | 4560 mm and 9250 mm |
Height to cab upper part | 3540 mm and 6680 mm |
Shovel
Shovel width | 3300 mm and 6400 mm |
Operation
Rear axle oscillating | 26 degrees and 22 degrees |
Tyre size | 26.5R25 and 58/85-57 84 PR (L-4) |
Working weight | 24740 kg and 229520 kg |
Motor
Manufacturer | Liebherr and Cummins |
Model | D 926 TI-E A2 and QSK 60 |
Aspiration | Turbocharging with intercooler and turbocharging |
Hydraulic system
Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and Piston |
Overflow valve pressure | 35000 kPa and 22752.7 kPa |
Gear box
Transmission type | hydrostatic 2+2 and endlessly variable value |
Images
Sizes
1. Length with bucket on ground level | 9000 mm | 1. Length with bucket on ground level | 17830 mm |
3. Height to cab upper part | 3540 mm | 3. Height to cab upper part | 6680 mm |
4. Wheelbase | 3570 mm | 4. Wheelbase | 7010 mm |
5. Clearance | 550 mm | 5. Clearance | 760 mm |
6. Hinge axis maximum height | 4560 mm | 6. Hinge axis maximum height | 9250 mm |
8. Radius at maximum lifting and unloading | 1150 mm | 8. Radius at maximum lifting and unloading | 2940 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 3300 mm | 7. Unloading ground clearance at maximum lifting | 6810 mm |