- Home/
- Comparison/
- Self-Powered Crane/
- Terex AC55-1 vs. Tadano ATF220G-5
Terex AC55-1 vs. Tadano ATF220G-5
2 reasons to buy Terex AC55-1:
Booms
Maximum working radius | 34 m and 21.3 m | 37 % more or 12.7 m |
Minimum height at maximum lifting angle | 10.3 m and 15.5 m | 34 % less or 5.2 m |
11 reasons to buy Tadano ATF220G-5:
Sizes
Upperstructure rear swing radius | 4949 mm and 7650 mm | 35 % less or 2701 mm |
Operation
Haul truck fuel volume | 530 l. and 400 l. | 25 % more or 130 l. |
Axels number | 5 and 3 | 40 % more or 2 |
Gear box
Forward gears number | 16 and 12 | 25 % more or 4 |
Carrying part engine
Maximum torque | 2399.8 Nm and 1730 Nm | 28 % more or 669.8 Nm |
Torque measured at | 1300 rev / min and 1080 rev / min | 17 % more or 220 rev |
Booms
Maximum angle of ascent | 84 degrees and 80 degrees | 5 % more or 4 degrees |
Maximum lifting capacity | 226796.2 kg and 55000 kg | 76 % more or 171796.2 kg |
Minimum operating radius | 2.4 m and 2.6 m | 8 % less or 0.2 m |
Sections number | 7 and 5 | 29 % more or 2 |
Max. height at max. lifting angle without boom | 70 m and 40 m | 43 % more or 30 m |
Neutral reasons:
Sizes
Transport height | 3817 mm and 3990 mm |
Width with extended supports | 6300 mm and 8300 mm |
Hauler length | 9805 mm and 13425 mm |
Transport length | 11625 mm and 15105 mm |
Transport width | 2250 mm and 3000 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 16.00 R 25 and 16.00R25 |
Gear box
Transmission type | automatic transmission and ZF AS-Tronic 16AS2602 mechanical transmission |
Carrying part engine
Manufacturer | Daimler Chrysler and Mercedes-Benz |
Model | OM 501 LA and OM 502 LA |
Power measured at | 1800 rev / min and 1800 rev / min |
Booms
Rotation speed | 1.8 rev / min and 1.8 rev / min |
Images
Sizes
1. Transport length | 11625 mm | 1. Transport length | 15105 mm |
2. Transport width | 2250 mm | 2. Transport width | 3000 mm |
3. Transport height | 3817 mm | 3. Transport height | 3990 mm |
6. Width with extended supports | 6300 mm | 6. Width with extended supports | 8300 mm |
7. Hauler length | 9805 mm | 7. Hauler length | 13425 mm |
8. Upperstructure rear swing radius | 7650 mm | 8. Upperstructure rear swing radius | 4949 mm |
Booms
9. Minimum height at maximum lifting angle | 10.3 m | 9. Minimum height at maximum lifting angle | 15.5 m |
10. Max. height at max. lifting angle without boom | 40 m | 10. Max. height at max. lifting angle without boom | 70 m |
11. Minimum operating radius | 2.6 m | 11. Minimum operating radius | 2.4 m |
12. Maximum working radius | 34 m | 12. Maximum working radius | 21.3 m |
13. Maximum angle of ascent | 80 degrees | 13. Maximum angle of ascent | 84 degrees |