- Home/
- Comparison/
- Self-Powered Crane/
- Terex AC70 vs. Grove AT865
Terex AC70 vs. Grove AT865
10 reasons to buy Terex AC70:
Sizes
Upperstructure rear swing radius | 3650 mm and 4510 mm | 19 % less or 860 mm |
Operation
Axels number | 4 and 3 | 25 % more or 1 |
Haul truck fuel volume | 400 l. and 365 l. | 9 % more or 35 l. |
Gear box
Forward gears number | 16 and 6 | 62 % more or 10 |
Maximum forward speed | 80 km/h and 70 km/h | 12 % more or 10 km/h |
Carrying part engine
Full power | 298.3 kW and 235 kW | 21 % more or 63.3 kW |
Maximum torque | 1850 Nm and 1170 Nm | 37 % more or 680 Nm |
Booms
Sections number | 8 and 4 | 50 % more or 4 |
Maximum lifting capacity | 70000 kg and 58967 kg | 16 % more or 11033 kg |
Maximum working radius | 42 m and 30.5 m | 27 % more or 11.5 m |
4 reasons to buy Grove AT865:
Gear box
Reverse gears number | 3 and 2 | 33 % more or 1 |
Carrying part engine
Torque measured at | 1500 rev / min and 1200 rev / min | 20 % more or 300 rev |
Booms
Maximum angle of ascent | 80 degrees and 78 degrees | 2 % more or 2 degrees |
Rotation speed | 1.9 rev / min and 1.6 rev / min | 16 % more or 0.3 rev |
Neutral reasons:
Sizes
Transport length | 9963 mm and 12900 mm |
Transport width | 2550 mm and 2750 mm |
Transport height | 3830 mm and 3850 mm |
Width with extended supports | 6550 mm and 6800 mm |
Hauler length | 8248 mm and 10480 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 14.00R25 and 20.5x25 Radial |
Gear box
Transmission type | DaimlerChrysler gearshift pattern G 210-16 and powershift |
Carrying part engine
Model | OM 457 LA and BF8L513 |
Manufacturer | Daimler Chrysler and Deutz |
Booms
Minimum operating radius | 3 m and 3 m |
Images
Sizes
1. Transport length | 9963 mm | 1. Transport length | 12900 mm |
2. Transport width | 2550 mm | 2. Transport width | 2750 mm |
3. Transport height | 3830 mm | 3. Transport height | 3850 mm |
6. Width with extended supports | 6550 mm | 6. Width with extended supports | 6800 mm |
7. Hauler length | 8248 mm | 7. Hauler length | 10480 mm |
8. Upperstructure rear swing radius | 3650 mm | 8. Upperstructure rear swing radius | 4510 mm |
Booms
11. Minimum operating radius | 3 m | 11. Minimum operating radius | 3 m |
12. Maximum working radius | 42 m | 12. Maximum working radius | 30.5 m |
13. Maximum angle of ascent | 78 degrees | 13. Maximum angle of ascent | 80 degrees |